MECHANICAL - RESEARCH
| S.No | Ref. No | Supervisor Name | Department | Research Area | Current Scholar under their supervision | Slot available under their supervision |
|---|---|---|---|---|---|---|
| 1 | 3320033 | Dr.P.Ganeshan | MECH | Composite Materials, Materials and Metallurgical Engineering, Design and Optimization, Manufacturing Engineering | 10 | 0 |
| 2 | 3320058 | Dr.T. Ramakrishnan | MECH | Composite Materials, Natural Fiber Reinforced Composite, Tribology and Machining | 6 | 2 |
| 3 | 3320057 | Dr.S. Venkatesh | MECH | Computational Fluid Dynamics, Optimization, Pollution Control Equipments | 4 | 4 |
| 4 | 4220038 | Dr. S. Ganesh Kumar | MECH | Tool Condition Monitoring, Smart Manufacturing, Tool Insert Coatings, Tool Wear | 1 | 3 |
| 5 | 4120115 | Dr. Amit Kumar | MECH | Thermal and Fluid Engineering, Solar Energy, Heat Transfer, Nano-Particle/Fluid | 0 | 4 |
| 6 | 4120181 | Dr. Bipin Kumar Singh | MECH | Ceramic Manufacturing Composites Optimization | 1 | 3 |
| 7 | 8720240 | Dr. N.K. Millerjothi | MECH | Engg. Internal Combustion Engines, Alternate Fuels | 0 | 8 |
| 8 | 4220046 | Dr. V. Naveenprabhu | MECH | Heat Transfer, Refrigeration, Renewable Energy, CFD | 0 | 4 |
| 9 | 4220088 | Dr. Y. Sureshbabu | MECH | Surface Coating, Alternate Fuel, IC Engine Emission | 0 | 6 |
| 10 | 2550012 | Dr.M. Karthikeyan | MECH | Textile Technology, Nano Technology, Protective Clothing, Heat Stress Assessment, Environment Assessment | 0 | 8 |
| 11 | 4420013 | Dr.R. Suresh Kumar | MECH | Metal Matrix Composites, Machinability Studies, Optimization, Tribological Studies | 0 | 8 |
| S.No | Research Centre | Supervisor Name | Scholar Name | Anna University Registration Number | Year of Registration | Full time / Part time |
|---|---|---|---|---|---|---|
| 1 | MECHANICAL | Dr. Bipin Kumar Singh | Mr. A. Selvarasu | 23132791167 | Jan-24 | Part Time |
| 2 | MECHANICAL | Dr. Ganesh Kumar. S | Mr. S.Gokul | 24142691115 | Jan-24 | Part Time |
| 3 | MECHANICAL | Dr. Ganeshan.P | Mr.M S Ravi Teja | 21192891145 | Jan-21 | Full Time |
| 4 | MECHANICAL | Dr. Ganeshan.P | Mr.B.M.Gnanasekaran | 21142891278 | Jan-21 | Part Time |
| 5 | MECHANICAL | Dr. Ganeshan.P | Mr.J.Gnanaraj | 21142891253 | Jan-21 | Part Time |
| 6 | MECHANICAL | Dr. Ganeshan.P | Ms.Sravani Yaramala | 21252897186 | Jul-21 | Full Time |
| 7 | MECHANICAL | Dr. Ganeshan.P | Mr.P.A.Nigalashik | 21182897161 | Jul-22 | Part Time |
| 8 | MECHANICAL | Dr. Ganeshan.P | Mr.T.Rajesh | 21132897288 | Jul-22 | Part Time |
| 9 | MECHANICAL | Dr. Ganeshan.P | Ms. J. Jeswin Roshini | 23241791117 | Jan-23 | Full Time |
| 10 | MECHANICAL | Dr. Ganeshan.P | Mr.U.Prakash | 23144697184 | Jul-23 | Part Time |
| 11 | MECHANICAL | Dr. Ganeshan.P | Mr.C.Vasantha Kumar | 23134697280 | Jul-23 | Part Time |
| 12 | MECHANICAL | Dr. Ganeshan.P | Mr. P . Elumalai | 23122697321 | Jul-23 | Part Time |
| 13 | MECHANICAL | Dr. Ramakrishnan.T | Mr.K. Aravinth | 21142697263 | Jul-21 | Full Time |
| 14 | MECHANICAL | Dr. Ramakrishnan.T | Mr.S. Gowtham | 22142691170 | Jan-22 | Part Time |
| 15 | MECHANICAL | Dr. Ramakrishnan.T | Mr.R. Sathish | 22142691134 | Jan-22 | Part Time |
| 16 | MECHANICAL | Dr. Ramakrishnan.T | Mr.M.Navin | 22142697186 | Jul-22 | Part Time |
| 17 | MECHANICAL | Dr. Ramakrishnan.T | Mr.T. Praveenkumar | 22142697165 | Jul-22 | Full Time |
| 18 | MECHANICAL | Dr. Ramakrishnan.T | Mr.S.Vinodh | 23142691179 | Jan-23 | Full Time |
| 19 | MECHANICAL | Dr. Venkatesh.S | Mr.J.Edison Thangaraj | 21142697283 | Jul-21 | Part Time |
| 20 | MECHANICAL | Dr. Venkatesh.S | Mr.A.Vimal | 22142691155 | Jan-22 | Part Time |
| 21 | MECHANICAL | Dr. Venkatesh.S | Mr.R. Vivek | 21142697137 | Jul-22 | Part Time |
| 22 | MECHANICAL | Dr. Venkatesh.S | Ms. S. Kousalya Devi | 24222691114 | Jan-24 | Part Time |
| S.No | Department | Name of the Doctorates |
|---|---|---|
| 1 | MECH | Dr. Ganeshan P |
| 2 | MECH | Dr. Karthikeyan M |
| 3 | MECH | Dr.Amit Kumar |
| 4 | MECH | Dr.Bipin Kumar Singh |
| 5 | MECH | Dr.Ganeshkumar S |
| 6 | MECH | Dr.Gokilakrishnan G |
| 7 | MECH | Dr.Karuppusami G |
| 8 | MECH | Dr.Miller Jothi N K |
| 9 | MECH | Dr.Naveenprabhu V |
| 10 | MECH | Dr.Ramakrishnan T |
| 11 | MECH | Dr.Sathish K |
| 12 | MECH | Dr.Sugumaran B |
| 13 | MECH | Dr.Suresh Babu Y |
| 14 | MECH | Dr.Suresh Kumar R |
| 15 | MECH | Dr.Suresh R K |
| 16 | MECH | Dr.Venkatesh S |
| S. No. | Publications | Year |
|---|---|---|
| 1 | Rajaram R.S., Babu P.K., Victor K., Kandasamy R., Pushpanathan G., Sivakumar V., Pushpanathan R., Vinayagam M., Barathy S., "Fuzzy Logic-based Power Optimizer for Solar Photovoltaic Power Systems", Pertanika Journal of Science and Technology, 32, (S1),2024, DOI: 10.47836/pjst.32.S1.06 | 2024 |
| 2 | Kumar M., Singh M., Kumar A., Kumar A., Kamble D., "Comparison of plastic collapse moment for different angled non-circular pipe bends under bending moments and internal pressure", Journal of the Brazilian Society of Mechanical Sciences and Engineering, 46, (4),2024, DOI: 10.1007/s40430-024-04810-4 | 2024 |
| 3 | Narayanan M.J., Balakrishnan K., Kumar N.V., Radhakrishnan S., "Development of microcontroller based technology for automatic safety control of vehicle braking system - A review", AIP Conference Proceedings, 3035, (1),2024, DOI: 10.1063/5.0194633 | 2024 |
| 4 | Yessian S., Thangavel A.R., Natraj S., Madhusuthanan S.V.R., Mahendran V.K., "Review on automatic over-load indication system", AIP Conference Proceedings, 3035, (1),2024, DOI: 10.1063/5.0195342 | 2024 |
| 5 | Pushpanathan G., Muthusamy B., Mohan K., Vaikundapermual R.C., "Future enhanced control movement of patients stretcher", AIP Conference Proceedings, 3035, (1),2024, DOI: 10.1063/5.0194558 | 2024 |
| 6 | Ramana Murty Naidu S.C.V., Kalidas N., Venkatachalam S., Mukuloth S., Asary A.R., Naveenprabhu V., Vishnu R., Vellingiri S., "Microstructure, Worn Surface, Wear Assessment and Taguchi's Approach of Titanium Alloy Hybrid Metal Matrix Composites for Automotive Applications", SAE Technical Papers, , (2024, DOI: 10.4271/2023-01-5103 | 2024 |
| 7 | Gautam S.K., Singh B.K., "Investigation on the effects of isothermal holding temperature and time on the coarsening mechanism and rheological properties of ADC12 Al semi-solid slurry", Materials Chemistry and Physics, 314, (2024, DOI: 10.1016/j.matchemphys.2023.128813 | 2024 |
| 8 | Kumar V., Prasad Singh G., Kumar M., Kumar A., Singh P., Ansu A.K., Sharma A., Alam T., Yadav A.S., Dobrotă D., "Nanocomposite Marvels: Unveiling Breakthroughs in Photocatalytic Water Splitting for Enhanced Hydrogen Evolution", ACS Omega, 9, (6),2024, DOI: 10.1021/acsomega.3c07822 | 2024 |
| 9 | Faisal N., Kumar D., Kumar A., Ansu A.K., Sharma A., Jain A.K., Alkahtani M.Q., Yunus Khan T.M., Almakayeel N., "Experimental Analysis for the Performance Assessment and Characteristics of Enhanced Magnesium Composites Reinforced with Nano-Sized Silicon Carbide Developed Using Powder Metallurgy", ACS Omega, 9, (5),2024, DOI: 10.1021/acsomega.3c05089 | 2024 |
| 10 | Kumar D., Layek A., Kumar A., Kumar R., "Experimental Study for the Enhancement of Thermal Efficiency and Development of Nusselt Number Correlation for the Roughened Collector of Solar Air Heater", Journal of Thermal Science and Engineering Applications, 16, (2),2024, DOI: 10.1115/1.4063915 | 2024 |
| 11 | Rai A.K., Ganeshan P., Almoallim H.S., Alharbi S.A., Raghavan S.S., "Automated Deep Learning Model with Optimization Mechanism for Segmenting Leukemia from Blood Smear Images", Fluctuation and Noise Letters, 23, (1),2024, DOI: 10.1142/S0219477524500056 | 2024 |
| 12 | Yuvaperiyasamy M., Senthilkumar N., Deepanraj B., Gokilakrishnan G., Premkumar R., "Application of response surface methodology and neural networks in pyramid solar still for seawater desalination: An optimization and prediction strategy", Global Nest Journal, 26, (4),2024, DOI: 10.30955/gnj.005773 | 2024 |
| 13 | Ramalingam S.K., Subramaniyam B.M., Karuppusamy A., Radhakrishnan S., "Green machinability studies on SAE 8822 alloy steel using RSM and taguchi method", Revista Materia, 29, (2),2024, DOI: 10.1590/1517-7076-RMAT-2024-0019 | 2024 |
| 14 | Kumar M., Kumar A., Kumar A., Kumar A., Kamble D., "Development of new improved plastic collapse moment equations of pressurized different angled pipe bends under bending moments", Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, , (2024, DOI: 10.1177/09544089241248428 | 2024 |
| 15 | Sahu M.K., Kumar A., Choudhary T., Ansu A.K., "Improvement of Aerodynamic Performance of Aerofoil Design by Using Shark Skin Inspired Denticles", Lecture Notes in Mechanical Engineering, , (2024, DOI: 10.1007/978-981-97-0918-2_50 | 2024 |
| 16 | Babu D.P.R., Devasenan M., Pushpanathan G., Raju M., "Performance Evaluation of UAV Airfoil Under Various Ground Conditions", Pertanika Journal of Science and Technology, 32, (Sp1),2024, DOI: 10.47836/pjst.32.S1.02 | 2024 |
| 17 | Kumar R.S., Vinodh S., Satishkumar P., Seenivasan S., "Evaluation of machinability performance of T51603 using response surface methodology and grey relational analysis", Revista Materia, 29, (1),2024, DOI: 10.1590/1517-7076-RMAT-2023-0322 | 2024 |
| 18 | Millerjothi N.K., Gebreslassie M.G., Nithyanandhan T., Sachuthananthan B., "Assessment of Detailed Energy Conservation Potentials: The Case of the Ethiopian Leather Industry", Pertanika Journal of Science and Technology, 32, (Sp1),2024, DOI: 10.47836/pjst.32.S1.03 | 2024 |
| 19 | Savarimuthu L.J., Victor K., Davaraj P., Pushpanathan G., Kandasamy R., Pushpanathan R., Vinayagam M., Barathy S., Sivakumar V., "Solar Energy Prediction Based on Intelligent Predictive Controller Algorithm", Pertanika Journal of Science and Technology, 32, (S1),2024, DOI: 10.47836/pjst.32.S1.05 | 2024 |
| 20 | NagarajaGanesh B., Rekha B., Kailasanathan C., Ganeshan P., Mohanavel V., "Sustainable fiber extraction and determination of mechanical and wear properties of Borassus flabellifer sprout fiber-reinforced polymer composites", Biomass Conversion and Biorefinery, , (2024, DOI: 10.1007/s13399-024-05480-x | 2024 |
| 21 | Gebru T., Millerjothi N.K., Raj N.M., Seenivasan S., "Energy Utilization and Production Assessment in a Cement Industry", Pertanika Journal of Science and Technology, 32, (Sp1),2024, DOI: 10.47836/pjst.32.S1.04 | 2024 |
| 22 | Raja K., Dhanabal M., Singh B.K., Ganeshan P., "Comparative study between hot isostatic pressing and pressure less sintering for self-lubricating CuO/ZTA composites", Journal of Ceramic Processing Research, 25, (1),2024, DOI: 10.36410/jcpr.2024.25.1.79 | 2024 |
| 23 | Babu K.A., Paramasivam B., Vijayananth K., Seenivasan V., Raju S., "Effect of eggshell powder on polyvinyl ester composite: A statistical correlation on mechanical strength", Environmental Progress and Sustainable Energy, , (2024, DOI: 10.1002/ep.14382 | 2024 |
| 24 | Nithyanandan N., Gokilakrishnan G., Manoj Kumar S., Hanish Anand S., "Characterization of heat-treated biosilica from biomass waste fox tail millet husks and banana fiber reinforced epoxy composite", Biomass Conversion and Biorefinery, , (2024, DOI: 10.1007/s13399-024-05411-w | 2024 |
| 25 | G R., Gokilakrishnan G., V C U., S S.K., "Mechanical, wear, and flammability of chitin-rich endoskeleton of Sepioteuthis Sepioidea powder-dispersed pineapple fiber-reinforced polyester composite", Biomass Conversion and Biorefinery, , (2024, DOI: 10.1007/s13399-024-05345-3 | 2024 |
| 26 | Manickaraj K., Ramamoorthi R., Ramakrishnan T., Karuppasamy R., "Enhancing solid waste sustainability with iroko wooden sawdust and african oil bean shell particle-strengthened epoxy composites", Global Nest Journal, 26, (1),2024, DOI: 10.30955/gnj.005467 | 2024 |
| 27 | Gopal P.M., Kavimani V., Sudhagar S., Sonar T., Venkatesh S., "Optimization of wire-cut EDM parameters using Taguchi and entropy coupled COPRAS approach for machining of CRT glass powder reinforced magnesium surface composite developed using friction stir processing", International Journal on Interactive Design and Manufacturing, , (2024, DOI: 10.1007/s12008-023-01705-x | 2024 |
| 28 | Vijaya G., Muralidhar S.M., Kumar M., Kumar A., Ashok Kumar M.S., Kumar D., Pandey S., Hasnain S.M.M., Singh A.K., Kumar G., "Nano indentation studies on ceramic thinfilms coatings deposited using sputtering process for energy applications", Materials Science for Energy Technologies, 7, (2024, DOI: 10.1016/j.mset.2023.08.001 | 2024 |
| 29 | Raman R., Gor M., Meenakshi R., Jayaseelan G.M., Chaturvedi A., Taqui S.N., Ganeshan P., Ouladsmane M., Kalam M.A., "Solar Energy Measurement and Monitoring Model by Using Internet of Things", Electric Power Components and Systems, 52, (10),2024, DOI: 10.1080/15325008.2023.2246481 | 2024 |
| 30 | Singh M M., Kumar M., Sivaiah P., G. V., Kumar A., Kumar D., Pandey S., Singh A.K., Deifalla A.F., Hasnain S.M.M., "Simulation of metal ceramic single layer coatings for solar energy applications", Materials Science for Energy Technologies, 7, (2024, DOI: 10.1016/j.mset.2023.06.003 | 2024 |
| 31 | Balasubramanian B., Raja K., Vignesh Kumar V., Ganeshan P., "Characterization study of Holoptelea integrifolia tree bark fibres reinforced epoxy composites", Natural Product Research, 38, (7),2024, DOI: 10.1080/14786419.2022.2137505 | 2024 |
| 32 | Singh B.K.; Gautam S.K.; Anand A.; Singh R.K.; Tiwari S.K.; Subhani A.R.; Upadhyaya R., "Parametric study to investigate mechanical properties of welded dissimilar Al6063 and Al 7073 alloys through FSW process", Engineering Research Express, 6, (3),2024, DOI: 10.1088/2631-8695/ad5f79 | 2024 |
| 33 | Saka A.; Jule L.T.; Badassa B.; Gudata L.; Nagaprasad N.; Shanmugam R.; Dwarampudi L.P.; Seenivasan V.; Ramaswamy K., "Biosynthesis of TiO2 nano particles by using Rosemary (Rosmarinus officinalis) leaf extracts and its application for crystal dye degradation under sunlight", BMC Chemistry, 18, (1),2024, DOI: 10.1186/s13065-024-01229-9 | 2024 |
| 34 | Paulsingarayar S.; Suresh Kumar R.; Vijayakumar S.J.D.; Kumar N.M., "Multi-criteria decision-making and artificial bee colony algorithm for optimization of process parameters in pyramid solar still", Desalination and Water Treatment, 319,2024, DOI: 10.1016/j.dwt.2024.100543 | 2024 |
| 35 | Ramesh G.; Gokilakrishnan G.; Jayaraja B.G.; Patil P.P., "High-content Al-T6/pineapple fiber/brass mesh reinforcements on nanosilica-toughened epoxy hybrid natural fiber metal laminate composite for aircraft applications", Biomass Conversion and Biorefinery, 14, (13),2024, DOI: 10.1007/s13399-022-03354-8 | 2024 |
| 36 | Kumar R.; Singh B.K.; Kumar A.; Kumar A.; Kumar A.; Kumar P., "Integrating selective flocculation techniques for enhanced efficiency in manufacturing processes: A novel approach through artificial neural network modeling", Journal of Alloys and Metallurgical Systems, 7,2024, DOI: 10.1016/j.jalmes.2024.100088 | 2024 |
| 37 | Kumar R.R.; Kumar A.; Kumar A.; Ansu A.K.; Goyal A.; Saxena K.K.; Prakash C.; Prasad J.L., "Thermal simulation on friction stir welding of AA6061 aluminum alloy by computational fluid dynamics", International Journal on Interactive Design and Manufacturing, 18, (5),2024, DOI: 10.1007/s12008-023-01311-x | 2024 |
| 38 | Kavimani V.; Paramasivam B.; Sasikumar R.; Venkatesh S., "A CRITIC integrated WASPAS approach for selection of natural and synthetic fibers embedded hybrid polymer composite configuration", Multiscale and Multidisciplinary Modeling, Experiments and Design, 7, (3),2024, DOI: 10.1007/s41939-023-00301-6 | 2024 |
| 39 | Singh B.K.; Kumar A.; Cep R.; Kumar A.; Kumar A.; Dogra N.; Logesh K., "Behavior of CuO as solid lubricant inside ZTA matrices", AIP Advances, 14, (8),2024, DOI: 10.1063/5.0213553 | 2024 |
| 40 | Das A.K.; Singh R.K.; Gupta N.; Kumar A.; Dwivedi Y.D.; Rana S.C.; Roy M.; Singh P.; Ansu A.K.; Goyal A.; Gupta M., "Comparative study using renormalized group k-ɛ, realizable k-ɛ, and standard k-ɛ models for flow through S-shaped diffuser", International Journal on Interactive Design and Manufacturing, 18, (5),2024, DOI: 10.1007/s12008-023-01609-w | 2024 |
| 41 | Sugumaran B.; Neme I., "Effect of adsorption interactions of Arabic gum with cement", Materials Research Express, 11, (6),2024, DOI: 10.1088/2053-1591/ad51d8 | 2024 |
| 42 | Gunasekar P.; Anderson A.; Sabari K.; Kumar R.S.; Saravanakumar S.; Yuvaperiyasamy M., "Hygral Analysis and Mechanical Strength Evaluation of TiO2 Nanoparticle-enhanced Natural Fiber Reinforced Epoxy Composites", Journal of Environmental Nanotechnology, 13, (2),2024, DOI: 10.13074/jent.06.242578 | 2024 |
| 43 | Gunasekar P.; Anderson A.; Saravanakumar S.; Suresh Kumar R.; Yuvaperiyasamy M.; Sabari K., "Synergistic Effects of Bamboo and Jute Fiber Integration in Geopolymer Composites", Journal of Environmental Nanotechnology, 13, (2),2024, DOI: 10.13074/jent.2024.06.242629 | 2024 |
| 44 | Kumar Murmu S.; Chattopadhayaya S.; Cep R.; Kumar A.; Kumar A.; Kumar Mahato S.; Kumar A.; Ranjan Sethy P.; Logesh K., "Exploring tribological properties in the design and manufacturing of metal matrix composites: an investigation into the AL6061-SiC-fly ASH alloy fabricated via stir casting process", Frontiers in Materials, 11,2024, DOI: 10.3389/fmats.2024.1415907 | 2024 |
| 45 | Prabhu P.; Gokilakrishnan G.; Hanish Anand S.; Kavitha C., "Comparative analysis of tamarind shell biomass powder and roasted chickpeas powder in kenaf fiber reinforced vinyl ester composite", Biomass Conversion and Biorefinery, 2024, DOI: 10.1007/s13399-024-05888-5 | 2024 |
| 46 | Chithra N.V.; Karuppasamy R.; Manickaraj K.; Ramakrishnan T., "Effect of Reinforcement Addition on Mechanical Behavior of Al MMC - A Critical Review", Journal of Environmental Nanotechnology, 13, (2),2024, DOI: 10.13074/jent.2024.06.242632 | 2024 |
| 47 | Gokilakrishnan G.; Varthanan P.A.; Sreeharan B.N.; Nidhyapathi C.; Kavitha N.; Rajendran C., "Simulation based swarm intelligence optimization to develop manufacturing distribution plan", International Journal on Interactive Design and Manufacturing, 2024, DOI: 10.1007/s12008-024-01980-2 | 2024 |
| 48 | Kumar A.; Kumar D.; Faisal N.; Sharma A.; Kumar Ansu A.; Goyal A.; Saxena K.K.; Prakash C.; Kumar D., "Application of 3D printing technology for medical implants: a state-of-the-art review", Advances in Materials and Processing Technologies, 10, (2),2024, DOI: 10.1080/2374068X.2023.2193788 | 2024 |
| 49 | Vasanth Kumar D., Srinivasan N., Davis Hans S.J., Gokul S., Arulmurugan B., Sathishkumar B., "Additive Manufacturing of Nanoscale and Microscale Materials", Additive Manufacturing with Novel Materials: Processes, Properties and Applications, , (2024, DOI: 10.1002/9781394198085.ch8 | 2024 |
| 50 | Verma S.K., Verma R., Singh B.K., Sinha R.S., "Management of Intelligent Transportation Systems and Advanced Technology", Energy, Environment, and Sustainability, Part F2419, (2024, DOI: 10.1007/978-981-97-0515-3_8 | 2024 |
| 51 | Verma R., Singh B.K., Zahidi F., "Management of GPS Tracking Systems in Transportation", Energy, Environment, and Sustainability, Part F2419, (2024, DOI: 10.1007/978-981-97-0515-3_11 | 2024 |
| 52 | Gokilakrishnan G., Ashoka Varthanan P., Sreeharan B.N., Nithiyapathi C., Kavitha N., Rajendran C., "Correction: Simulation based swarm intelligence optimization to develop manufacturing distribution plan (International Journal on Interactive Design and Manufacturing (IJIDeM), (2024), 10.1007/s12008-024-01980-2)", International Journal on Interactive Design and Manufacturing, 2024, DOI: 10.1007/s12008-024-02053-0 | 2024 |
| 53 | Suresh Kumar R.; Naveen S.; Suresh V.; Madhu S., "Novel Approach to Monitoring the Surface Integrity of Aluminum 5052 Using Sound and Vibration Signals during Turning with Titanium-Coated Carbide Inserts", Journal of Materials Engineering and Performance, ,2024, DOI: 10.1007/s11665-024-09883-9 | 2024 |
| 54 | Kumar D., Kumar A., Amit K., Banerjee P., "Role of Nano Composite in Additive Technologies: A State of Art Review", Springer Tracts in Additive Manufacturing, Part F32552024, DOI: 10.1007/978-3-031-37671-9_13 | 2024 |
| 55 | Sivalingam V., Thirumalaisamy R., "Microstructure and Corrosion Study on Friction Surfaced Aluminum Alloy Coatings over Mild Steel", Periodica Polytechnica Chemical Engineering, 68, (3),2024, DOI: 10.3311/PPch.37018 | 2024 |
| 56 | Praveen S., Marimuthu S., Alqahtani B., Bharathiraja G., Gokilakrishnan G., "Enhancing Bulb Turbine Performance Assessing Air Injection for Vibration Mitigation and Hydrofoil Cavitation", Journal of Applied Fluid Mechanics, 17, (11),2024, DOI: 10.47176/jafm.17.11.2686 | 2024 |
| 57 | Annadate P., Bhat A., Bojjawar S., Patidar H., Prassath P.A., Gokul S., "AI Based Virtual Laboratory Using Intelligent Controller with CC-Link Remote IO Module", 2nd International Conference on Sustainable Computing and Smart Systems, ICSCSS 2024 - Proceedings, 2024, DOI: 10.1109/ICSCSS60660.2024.10624995 | 2024 |
| 58 | Saravanakumar, Jayapathy H., Rahul, Jothi M., "Thermal Power in India—Past, Present, and Future Perspectives", Lecture Notes in Mechanical Engineering, 2024, DOI: 10.1007/978-981-97-4500-5_18 | 2024 |
| 59 | Sathish K., Vanchimuthu C., Thiyagarajan V., Bavadharani C., Ramamoorthi R., "Investigation on the Performance of Draft Tube by Numerical and Experimental Approach: A Review", Lecture Notes in Mechanical Engineering, 2024, DOI: 10.1007/978-981-97-4500-5_24 | 2024 |
| 60 | Kumar R., Singh B.K., Kumar A., Ansu A.K., Goyal A., Saxena K.K., Gupta M., Agarwal M.K., "Design of water distribution pipes alongside modeling and simulation of water distribution system for efficient management", International Journal on Interactive Design and Manufacturing, 1882024, DOI: 10.1007/s12008-023-01436-z | 2024 |
| 61 | Ramu S., Gebremicheal G.H., Mohan R., Kumar R.S., Karthigairajan M., Masannan V., Yuvaperiyasamy M., Durga S., "Alkali and Non-alkali Treated Coconut Coir Fiber-Reinforced Coconut Shell Powder/MWCNT-Filled Polyester Matrix Composite: An Experimental Comparison", Journal of Environmental Nanotechnology, 1332024, DOI: 10.13074/jent.2024.09.243893 | 2024 |
| 62 | Justin Raj Y., Bovas Herbert Bejaxhin A., Madhumitha R., Anitha A.S., Gehani H., Abdullah A., Naveenprabhu V., "Experimental Analysis of EDM Parameters on D2 Die Steel Using Nano-aluminum Composite Electrodes", Journal of Environmental Nanotechnology, 1332024, DOI: 10.13074/jent.2024.06.243848 | 2024 |
| 63 | Prabu R., Yuvaraj G., Saravanan G., Pradhan R., "Influence of silane functionalized heat treated biosilica on mechanical, wear, and dynamic load–bearing properties of nettle fibre–reinforced vinyl ester composites", Biomass Conversion and Biorefinery, 2024, DOI: 10.1007/s13399-024-06243-4 | 2024 |
| 64 | Vimal A., Nicholas J.S., Kumar R.K.J., Sundar A.S., Pranesh B.R., "A review on unmanned aerial vehicle used for 360° surveillance", AIP Conference Proceedings, 322112024, DOI: 10.1063/5.0235889 | 2024 |
| 65 | Gokul S., Ramakrishnan T., Manickaraj K., Devadharshan P., Mathew M.K., Prabhu T.V., "Analyzing challenges and prospects for sustainable development with green energy: A comprehensive review", AIP Conference Proceedings, 322112024, DOI: 10.1063/5.0235884 | 2024 |
| 66 | Sathish K., Manickaraj K., Vanchimuthu C., Thiyagarajan V., Bavadharani C., "Investigating the effects of draft tube and its properties on Francis turbine performance - A critical review", AIP Conference Proceedings, 322112024, DOI: 10.1063/5.0235917 | 2024 |
| 67 | Naveenprabhu V., Veeramanikandan K., Poorani B.S., Gokulamadhavan K., Suba K., "A critical overview on corrosion characteristics of copper fin", AIP Conference Proceedings, 322112024, DOI: 10.1063/5.0235841 | 2024 |
| 68 | Sathish K., Nithyanandhan T., Vanchimuthu C., Thiyagarajan V., Bavadharani C., "An overview of the design and characteristics of Kaplan turbines", AIP Conference Proceedings, 322112024, DOI: 10.1063/5.0235916 | 2024 |
| 69 | Kumar R.S., Asha F.G., Aashika J., Madheswaran C., Shamanth S., "3D printing processes, materials and applications - A review", AIP Conference Proceedings, 322112024, DOI: 10.1063/5.0235893 | 2024 |
| 70 | Ramakrishnan T., Manickaraj K., Prithiv S.P., Aditya S.L.L., Rajanarayanan N., Gopalsamy S., "Advancements in aluminum metal matrix composites: Reinforcement, manufacturing, and applications", AIP Conference Proceedings, 322112024, DOI: 10.1063/5.0235881 | 2024 |
| 71 | Sakravarthy N.V., Tanikaiselvan G., Surendhar N., Varshan A.B., "Fuel shield pro: A toolkit for bike safety and fuel theft deterrence using polyethylene", AIP Conference Proceedings, 322112024, DOI: 10.1063/5.0235932 | 2024 |
| 72 | Venkatesh S., Harishravan B., Senthamaraiselvi B.L., Sojin S., Arulkumar E., "A substantiate study on 316LSS - Review on its properties", AIP Conference Proceedings, 322112024, DOI: 10.1063/5.0235879 | 2024 |
| 73 | Balasubramani S., Gokul S., Ramakrishnan T., Nitin P., Prithivraj K., Arjun R.N., "Prediction of defects in casting surface using image processing techniques", AIP Conference Proceedings, 322112024, DOI: 10.1063/5.0236172 | 2024 |
| 74 | Gokilakrishnan G., Parthasarathi R., Dhanya R., Sathguru R., "Review of metal additives in enhancing the mechanical properties of composite materials", AIP Conference Proceedings, 322112024, DOI: 10.1063/5.0235880 | 2024 |
| 75 | Gowtham S., Balaji K.S.R., Subisri S.K., Santhosh T., "Investigation of drilling and delamination on agave americana leaf fiber composite", AIP Conference Proceedings, 322112024, DOI: 10.1063/5.0236072 | 2024 |
| 76 | Pal P., Soni A., Kumar S.B., Singh B.K., Mishra A.K., Singh P., "Investigate the effect of process parameters for weld bead during arc welding process", AIP Conference Proceedings, 322112024, DOI: 10.1063/5.0235992 | 2024 |
| 77 | Sahu M.K., Biswal R.K., Kumar A., Ansu A.K., Kumar M., Kumar M., Thakur R.M., "Waste heat recovery in reheating furnace to improve the furnace efficiency with veneering cement and zirconia coating material", AIP Conference Proceedings, 322112024, DOI: 10.1063/5.0235995 | 2024 |
| 78 | Naveenprabhu V., Gayathri I., Madanprasad S., Dineshkumar L., Naveen S., Arulkumar E., "A critical review on the aluminium metal matrix composites on high thermal applications", AIP Conference Proceedings, 322112024, DOI: 10.1063/5.0235838 | 2024 |
| 79 | Sakravarthy N.V., Sudeep V., Vinith K., Dusendiran S., "Development of high strength and durable automobile dashboard by the dispersion of jute fibre into polyester resin reinforced with eggshell filler", AIP Conference Proceedings, 322112024, DOI: 10.1063/5.0235931 | 2024 |
| 80 | Harini S., Kanishk R., Deepatharan K.S., Singh B.K., Arulkumar E., "Effect of temperature on physical properties of PLA materials casted through additive manufacturing - A prolix review", AIP Conference Proceedings, 322112024, DOI: 10.1063/5.0235847 | 2024 |
| 81 | Jothish A.T., Maniraj J., Sahayaraj A.F., Selvan M.T., Kumar S.G., "Recent developments in functional polymer composites for biomedical applications", AIP Conference Proceedings, 322112024, DOI: 10.1063/5.0235903 | 2024 |
| 82 | Sathish K., Nithyanandhan T., Ravishankar P., Rohith S., Malathi L.K., "Material characteristics and its performance measures in turbine: A review", AIP Conference Proceedings, 322112024, DOI: 10.1063/5.0235912 | 2024 |
| 83 | Pushpanathan G., Karthikeyan L.P., Kumar K.M., Karuppusam R., "Enhance the safety of passengers in public transport by using the IOT & machine learning techniques", AIP Conference Proceedings, 322112024, DOI: 10.1063/5.0236755 | 2024 |
| 84 | Naveenprabhu V., Varsha A.R., Padma R.S., Tamilarasan J., "Optimizing material selection for high-temperature sensible energy storage", AIP Conference Proceedings, 322112024, DOI: 10.1063/5.0235843 | 2024 |
| 85 | Ganeshan P., Kathryn J.B., Kumar S.N., Siddharth S., "Studies on the characterization of natural fiber for their potential use for bio-degradable materials", AIP Conference Proceedings, 322112024, DOI: 10.1063/5.0236765 | 2024 |
| 86 | Raj R.A., Pragadeesh A., Arun S.M., Naveenprabhu V., "A review on thermal characteristics of natural fibre", AIP Conference Proceedings, 322112024, DOI: 10.1063/5.0235908 | 2024 |
| 87 | Kumar A., Harikrishnan K., Fathimashahiba Z., Arjunan M., Kumar M., Avinasilingam M., "Exploring the thermophysical characteristics of nanofluids containing nanoparticles and its possible outcomes", AIP Conference Proceedings, 322112024, DOI: 10.1063/5.0235985 | 2024 |
| 88 | Kumar R.S., Kumar T.P., Daniel S., Gugapriyan R., Shamanth S., "A review on sustainable manufacturing through green techniques", AIP Conference Proceedings, 322112024, DOI: 10.1063/5.0235892 | 2024 |
| 89 | Venkatesh S., Elanchezhiyan E., Elavarasan S., Gowtham T., Prakash G.J., Gopalsamy S., "Review on Mg alloys physical properties and machining properties", AIP Conference Proceedings, 322112024, DOI: 10.1063/5.0235878 | 2024 |
| 90 | Naveenprabhu V., Raj T.P., Mahalakshmi V., Naveen R., "Exploring material choices for additive manufacturing method in high-temperature applications: A comparative analysis", AIP Conference Proceedings, 322112024, DOI: 10.1063/5.0235842 | 2024 |
| 91 | Vimal A., Prabhanj S.R., Edison Thangaraj J., Navin R., Mathan S., Gopalsamy S., "A review on cooling of electronic components using piezoelectric cooler and nanofluid", AIP Conference Proceedings, 322112024, DOI: 10.1063/5.0235888 | 2024 |
| 92 | Srivastava A.K., Pal P., Pal A., Singh B.K., Kumar R., Kumar A., "Parametric evaluation & optimization of wire-EDM process for machining of super alloy materials (EN-24 steel) in terms of surface integrity and material removal rate", AIP Conference Proceedings, 322112024, DOI: 10.1063/5.0235844 | 2024 |
| 93 | Venkatesh S., Kathiravan A.A., Kavipriyan M., Nandhini S.S.G., Avinasilingam M., "A review on aluminium 7075 alloy: Micro structure, mechanical properties and application", AIP Conference Proceedings, 322112024, DOI: 10.1063/5.0235874 | 2024 |
| 94 | Kannan M., Manohar L., Agasto A.H., Mugeshkannan B., Sahayaraj A.F., Selvan M.T., Kumar S.G., "Review on bio-inspired approaches in polymer composites: Mimicking nature for enhanced performance", AIP Conference Proceedings, 322112024, DOI: 10.1063/5.0235906 | 2024 |
| 95 | Ganeshan P., Karthik C.S.R., Suganth B., Gokulakannan P., Kavin P., "Development of an automated sugarcane peeler", AIP Conference Proceedings, 322112024, DOI: 10.1063/5.0236757 | 2024 |
| 96 | Kumar A., Kumar M., Kumar A., Kumar A., Kumar S.B., Thakur R.M., Ansu A.K., "Dynamic study of a laminated curved beam made of bimodular composite material with equivalent stiffness method", AIP Conference Proceedings, 322112024, DOI: 10.1063/5.0235987 | 2024 |
| 97 | Sathish K., Manickaraj K., Krishna S.A., Basha K.M., Pravin R., "Integrating sustainable materials in exoskeleton development: A review", AIP Conference Proceedings, 322112024, DOI: 10.1063/5.0235913 | 2024 |
| 98 | Dhamotharan S., Pradeep K., Prasanth K.S., Kaviyarasu M., Gokul M., Sahayaraj A.F., Selvan M.T., Kumar S.G., "Progress in self-healing polymer composites: Materials design, mechanisms, and applications", AIP Conference Proceedings, 322112024, DOI: 10.1063/5.0235905 | 2024 |
| 99 | Pandya M., Kumar A., Ansu A.K., Kumar A., Kumar A., Kumar S.B., Thakur R.M., Rawani A., "Procedures, component optimization, and integration in the analysis of thermal energy storage materials", AIP Conference Proceedings, 322112024, DOI: 10.1063/5.0235986 | 2024 |
| 100 | Suresh Kumar R., Vishwadeep V., Viswarathan V., Adhilingavignesh K., Shamanth S., "A review on sol-gel method and coating of hybrid nano-composite", AIP Conference Proceedings, 322112024, DOI: 10.1063/5.0235891 | 2024 |
| 101 | Ramakrishnan T., Shameer M.S., Prasath A.M., Hemnath R., Rathinam S.C., Avinasilingam M., "Automatic plant irrigation system", AIP Conference Proceedings, 322112024, DOI: 10.1063/5.0235885 | 2024 |
| 102 | Millerjothi N.K., Adhithan S.K., Khogulanand V.R., Kiruba P., "Enhanced sorbent materials for post-combustion CO2capture - A prolix review", AIP Conference Proceedings, 322112024, DOI: 10.1063/5.0235925 | 2024 |
| 103 | Delcy V.R., Umadevi V., Yogeswari B., Banu A.S., Deivanayaki S., "Structural and spectral insights of doped and undoped L-alanine crystals", AIP Conference Proceedings, 322112024, DOI: 10.1063/5.0235920 | 2024 |
| 104 | Singh A.; Sinha S.; Verma S.B.; Singh B.K., "Benefits and Challenges of Decentralization in Education for Resource Optimization and Improved Performance", Decentralized Systems and Distributed Computing, 2024, DOI: 10.1002/9781394205127.ch8 | 2024 |
| 105 | Kumar R.S.; Yuvaperiyasamy M.; Sathish R.; Miniappan P.K.; Premkumar R.; Arivalagan P., "Impact Loading on Polymer Nanocomposites-A Comprehensive Review", Journal of Environmental Nanotechnology, 1332024, DOI: 10.13074/jent.2024.09.243821 | 2024 |
| 106 | Vivek R.; Lalith Surya B.; Kishore A.T.; Jai Akash S.; Saikumar A., ""effortless Hydration: Exploring Automatic Water Dispensers"", Journal of Physics: Conference Series, 283712024, DOI: 10.1088/1742-6596/2837/1/012006 | 2024 |
| 107 | Karthik Reddy G.; Singh P.; Ravi K.C.; Anusha B.; Gowri C.; Vivek R., "Modeling and Analysis of MEMS Electrostatic Energy Harvesting System", Journal of Physics: Conference Series, 283712024, DOI: 10.1088/1742-6596/2837/1/012104 | 2024 |
| 108 | Vivek R.; Venkatesh S.; Satyanarayana Gupta M.; Kavin Kumaar S.S.; Sivashri J.T.; Aswin G.; Jagadheep A., "Particle disseverment study in square-cylinder vortex separator by Centrifugal action in CFD", Journal of Physics: Conference Series, 283712024, DOI: 10.1088/1742-6596/2837/1/012027 | 2024 |
| 109 | Vivek R.; Ganeshkumar S.; Dharanikumar S.; Rameshbabu R.; Balasubramani S.; Vivek Anand A., "Impact on pitting corrosion in Martensitic Stainless Steel: The Effect of Annealing Response", Journal of Physics: Conference Series, 283712024, DOI: 10.1088/1742-6596/2837/1/012007 | 2024 |
| 110 | Naveenprabhu V.; Veeramanikandan K.; Ragu S.; Hariharan S.; Sravanthi G., "Study on Enhanced Transfer Characteristic in Heat Exchanger Tubes with Low Fins", Journal of Physics: Conference Series, 283712024, DOI: 10.1088/1742-6596/2837/1/012058 | 2024 |
| 111 | Venkatesh S., Kathirvel M., Dharsan R.V., Yogaraju K., Sachuthananthan B., "Review on Flow Pattern Characters in Cyclone Separator", 10th International Conference on Advanced Computing and Communication Systems, ICACCS 2024, 2024, DOI: 10.1109/ICACCS60874.2024.10717254 | 2024 |
| 112 | Nithyanandhan T., Manickaraj K., Sathish K., Ramachandran N., Sachuthananthan B., "Effects of Palm Stalk Ash on Mechanical Properties of Al6061 Reinforced with Graphite by Using Stir Casting Process", 10th International Conference on Advanced Computing and Communication Systems, ICACCS 2024, 2024, DOI: 10.1109/ICACCS60874.2024.10717271 | 2024 |
| 113 | Suhan M., Shanmugam C., Vimal A., Vijay Ram G., Janani B., Amarnath A.S., "A Review on Power Generation Using Vertical Windmill", 10th International Conference on Advanced Computing and Communication Systems, ICACCS 2024, 2024, DOI: 10.1109/ICACCS60874.2024.10717218 | 2024 |
| 114 | Manickaraj K., Nithyanandhan T., Sathish K., Karuppasamy R., Sachuthananthan B., "An Experimental Investigation of Volume Fraction of Natural Java Jute and Sponge Gourd Fiber Reinforced Polymer Matrix Composite", 10th International Conference on Advanced Computing and Communication Systems, ICACCS 2024, 2024, DOI: 10.1109/ICACCS60874.2024.10717221 | 2024 |
| 115 | Aravinth K., Rajesh Kumar D., Ramakrishnan T., Veeramanikandan K., Navin M., Kavi Rasu K., "Prediction of Magnetic Properties in MR Damper Using FEA", 10th International Conference on Advanced Computing and Communication Systems, ICACCS 2024, 2024, DOI: 10.1109/ICACCS60874.2024.10716957 | 2024 |
| 116 | Priyanka G., Nivaashini M., Shree Akshaya B., Subashini M., Ritish G., "An Efficient Image to Speech Generation System for Visually Impaired Individuals Using Deep Learning Techniques", 10th International Conference on Advanced Computing and Communication Systems, ICACCS 2024, 2024, DOI: 10.1109/ICACCS60874.2024.10717315 | 2024 |
| 117 | Venkatesh S., Elavarasan S., Elanchezhiyan E., Suganth B., Sachuthananthan B., "Performance of Dry Powder Inhaler - Review", 10th International Conference on Advanced Computing and Communication Systems, ICACCS 2024, 2024, DOI: 10.1109/ICACCS60874.2024.10717214 | 2024 |
| 118 | Sachuthananthan B., Padmaja N., Shaik F., Kumar P.S., Vyas M.G., Jothi N.K.M., "Electric Vehicle Technology Opportunities and Challenges", 10th International Conference on Advanced Computing and Communication Systems, ICACCS 2024, 2024, DOI: 10.1109/ICACCS60874.2024.10717213 | 2024 |
| 119 | Saravanan G., Aadithan U., Jaiyesh B., Kaviyarasu E., Kumaresan D., "Design of Hydro Electric Power Generator for Domestic Pipeline", 10th International Conference on Advanced Computing and Communication Systems, ICACCS 2024, 2024, DOI: 10.1109/ICACCS60874.2024.10717006 | 2024 |
| S.No | Title of the Project | Names of the Principal Invigilator | Date of Issuing Sanction Order | Department | Duration | Amount of Seed Money Sanctioned (Rs.) |
|---|---|---|---|---|---|---|
| 1 | Procurement of Energy Audit Instruments | Dr.N.K.Millejothi, Prof | 04-10-2023 | Mech | 2023-2024 | 399,481 |
| 2 | Experimental Investigation on Emissions and Performance Characteristics of a ethanol | Dr. Y. Sureshbabu | 04-10-2023 | Mech | 2023-2024 | 200000 |
| 3 | Improving Hydrothermal performance of Heat Exchanger Using Enhancer and Nano-fluids | Dr.Amit Kumar, AP Dr.Bipin Kumar Singh, AP Dr.P.Ganeshan, Prof | 04-10-2023 | Mech | 2023-2024 | 215,000 |
| 4 | Design and Development of Novel plant derived | Dr. T. Ramakrishnan,ASP Dr. R. Sureshkumar,Prof Dr.S. Venkatesh, ASP | 04-10-2023 | Mech | 2023-2024 | 358,000 |
| Total | 1,172,481 |
| S.No | Title of the Project | Names of the Principal Invigilator | Date of Issuing Sanction Order | Department | Duration | Amount of Seed Money Sanctioned (Rs.) |
|---|---|---|---|---|---|---|
| 1 | E-Vehicle | Mr.S.Gowtham, AP Mr.K.Sathish, AP | 08 Oct 2022 | Mech | 2022-2023 | 400,000 |
| Total | 400,000 |
| S.No | Dept | Name of Principal Investigator and Co- Investigator | Title of the Proposal | Type of Project (Research/ Seminar/ Workshop / FDP/ Conference) | Name of Funding Agency | Period | Total Grant Received |
|---|---|---|---|---|---|---|---|
| 1 | MECH EEE | Dr.G. Karuppusami Dr.P.Anbarasu | Solar Powered Nano Milk making machine for small scale farmers in adopted village | UBA | DST | One year | ₹100,000 |
| 2 | MECH ECE | Dr.R.Suresh Kumar Lt.M.Mahaboob | Enhancing Precision Agriculture by fusing AI with Aerial Electric Vehicle Technology | FDP | AICTE - ATAL | 12 days | ₹600,000 |
| Total | ₹700,000 |
| S.No | Dept | Name of Principal Investigator and Co- Investigator | Title of the Proposal | Type of Project (Research/ Seminar/ Workshop / FDP/ Conference) | Name of Funding Agency | Period | Total Grant Received |
|---|---|---|---|---|---|---|---|
| 1 | Mech | Dr.S. Venkatesh | Investigation and development low cost emission control system for casting industries | Research | DST SERB | Three year | 1,500,000 |
| 2 | Mech | Dr. T. Ramakrishnan | International Conference on Sustainable Materials and Technologies 2024 | Conference | SERB | One year | 80,000 |
| 3 | Mech | Dr.G. Karuppusami Mr.N. Vishnu Sakravarthy | Women Entrepreneurship Development Program WEDP and Faculty Development Program FDP | FDP/ Workshop | DST | One year | 650,000 |
| Total | 2,230,000 |
| S.No | Dept | Name of Principal Investigator and Co- Investigator | Title of the Proposal | Type of Project (Research/ Seminar/ Workshop / FDP/ Conference) | Name of Funding Agency | Period | Total Grant Received |
|---|---|---|---|---|---|---|---|
| 1 | Mech | Dr.G.Karuppusami, Mr.N.Vishnu Sakravarthy | Smart India Hackathon 2022 Software Edition | Hackathon | AICTE, MOE | Aug 25 & 26 | 672,000 |
| 2 | Mech | Dr.R.Suresh Kumar Dr.T.Ramakrishnan Dr.S.Venkatesh Dr.G.Gokilakrishnan Dr.Bipin Kumar Singh | DST-FIST Funding | Research | DST | 19-12-2022 to 19-12-2027 | 5,900,000 |
| 3 | Mech | Dr.G.Karuppusami Mr.N.Vishnu Sakravarthy | Women Entrepreneurship Development Program WEDP and Faculty Development Program FDP | Skill Development | DST-NIMAT | Mar-2023 to 01-05-2023 | 260,000 |
| 4 | Mech | Dr.N.K.Millerjothi | International Conference on Emerging Trends in Mechanical Sciences for Sustainable Technologies ICETMSST 2023 | Conference | CSIR | 12-04-2023 & 13-04-2023 | 30,000 |
| Total | 6,862,000 |
| S.No | Dept | Name of Principal Investigator and Co- Investigator | Title of the Proposal | Type of Project (Research/ Seminar/ Workshop / FDP/ Conference) | Name of Funding Agency | Period | Total Grant Received |
|---|---|---|---|---|---|---|---|
| 1 | Mech | Dr.R.Suresh Kumar Mr.K.Sathish Mr. V.Naveenprabhu | FDP-Trends & Challenges in Electric Vehicles | FDP | AICTE-ATAL | 20.09.2021 to 24.09.2021 | 93,000 |
| Total | 93,000 |
| S.No | Dept | Name of Principal Investigator and Co- Investigator | Title of the Proposal | Type of Project (Research/ Seminar/ Workshop / FDP/ Conference) | Name of Funding Agency | Period | Total Grant Received |
|---|---|---|---|---|---|---|---|
| 1 | Mech | Dr.G.Karuppusami | The National Science & Technology Entrepreneurship Development Board (NSTEDB) approved establishment of Innovation and Entrepreneurship Development Centre (IEDC) | Projects | DST – NSTEDB | 2020-21 | 800,000 |
| 2 | Mech | Dr.G.Karuppusami | NSTEDB sanctioned Free Women Entrepreneurship Develoment program for external candidates | Skill Development | NSTEDB | 2020-21 | 160,000 |
| 3 | Mech | Dr.G.Karuppusami | UBA Program Perennial Award Fund | Projects | MHRD | 2020-21 | 175,000 |
| Total | 1,135,000 |
| S.No | Dept | Name of Principal Investigator and Co- Investigator | Title of the Proposal | Type of Project (Research/ Seminar/ Workshop / FDP/ Conference) | Name of Funding Agency | Period | Total Grant Received |
|---|---|---|---|---|---|---|---|
| 1 | Mech | Dr.G.Karuppusami | Suryamitra Solar Training Programme sponsored by National Institute of Solar Energy (NISE), Ministry of New and Renewable Energy (MNRE), Government of India | Skill Development | NISE, MNRE | 2019-2020 | 998,174 |
| 2 | Mech | Dr.G.Karuppusami | The National Science & Technology Entrepreneurship Development Board (NSTEDB) approved establishment of Innovation and Entrepreneurship Development Centre (IEDC) | Projects | DST – NSTEDB | 2019-2020 | 800,000 |
| 3 | Mech | Dr.G.Karuppusami Mr.P.Anbarasu | Floating solar powered drip irrigation system for the sapling using optimization techniques. | Projects | MHRD | 2019-2020 | 100,000 |
| 4 | Mech | Dr.G.Karuppusami | Entrepreneurship Development Institute of India (EDII), Ahmadabad sanctioned Free Women Entrepreneurship Develoment program for external candidates | Skill Development | Entrepreneurship Development Institute of India (EDII) | 2019-2020 | 200,000 |
| Total | 2,098,174 |
| S.No | Dept | Name of Principal Investigator and Co- Investigator | Title of the Proposal | Type of Project (Research/ Seminar/ Workshop / FDP/ Conference) | Name of Funding Agency | Period | Total Grant Received |
|---|---|---|---|---|---|---|---|
| 1 | Mech | Dr.G. Karuppusami | The National Science & Technology Entrepreneurship Development Board (NSTEDB) approved establishment of Innovation and Entrepreneurship Development Centre (IEDC) | Projects | DST – NSTEDB | 2018-2019 | 800,000 |
| 2 | Mech | Dr.G. Karuppusami | Suryamitra Solar Training Programme sponsored by National Institute of Solar Energy (NISE), Ministry of New and Renewable Energy (MNRE),Government of India | Skill Development | NISE, MNRE | 2018-2019 | 854,251 |
| 3 | Mech | Dr.G. Karuppusami | Entrepreneurship Development Institute of India (EDII), Ahmadabad sanctioned Free Women Entrepreneurship Develoment program for external candidates | Skill Development | Entrepreneurship Development Institute of India (EDII) | 2018-2019 | 200,000 |
| 4 | Mech | Dr.G. Karuppusami | Unnat Bharat Abjiyan Program sanctioned by MHRD and AICTE. 5 Villages adopted and Customisation Project | Projects | MHRD | 2018-2019 | 50,000 |
| 5 | Mech | Dr.G. Karuppusami, Mr.P.Anbarasu | Customization of 13 solar street lights at Kodhavadi Village | Projects | MHRD | 2018-2019 | 50,000 |
| Total | 1,954,251 |
| S.No | Dept | Name of Principal Investigator and Co- Investigator | Title of the Proposal | Type of Project (Research/ Seminar/ Workshop / FDP/ Conference) | Name of Funding Agency | Period | Total Grant Received |
|---|---|---|---|---|---|---|---|
| 1 | Mech | Dr.G.Karuppusami | Suryamitra Solar Training Programme sponsored by National Institute of Solar Energy (NISE), Ministry of New and Renewable Energy (MNRE), Government of India | Skill Development | NISE, MNRE | 2017-18 | 786,334 |
| 2 | Mech | Dr.G.Karuppusami | The National Science & Technology Entrepreneurship Development Board (NSTEDB) approved establishment of Innovation and Entrepreneurship Development Centre (IEDC) | Projects | DST – NSTEDB | 2017-18 | 800,000 |
| 3 | Mech | Dr.G.Karuppusami | Entrepreneurship Development Institute of India (EDII), Ahmadabad sanctioned Free Women Entrepreneurship Develoment program for external candidates | Skill Development | Entrepreneurship Development Institute of India (EDII) | 2017-18 | 200,000 |
| Total | 1,786,334 |
| S.No | Dept | Name of Principal Investigator and Co- Investigator | Title of the Proposal | Type of Project (Research/ Seminar/ Workshop / FDP/ Conference) | Name of Funding Agency | Period | Total Grant Receive |
|---|---|---|---|---|---|---|---|
| 1 | Mech | Dr.G. Karuppusami | All India Council for Technical Education (AICTE) has sanctioned to conduct Pradhan Mantri Kaushal Vikas Yojana (PMKVY) skill development programme. 4 Programmes are approved; CNC Machining, Lathe Operation, Electrician and Plumbing. | Skill Development | AICTE | 2016-17 | 1,183,640 |
| 2 | Mech | Dr.G. Karuppusami | The National Science & Technology Entrepreneurship Development Board (NSTEDB) approved establishment of Innovation and Entrepreneurship Development Centre (IEDC) | Projects | DST – NSTEDB | 2016-17 | 1,330,000 |
| Total | 2,513,640 |
| S.NO | ACY | Department | Patent Application Number | Status of Patent (Published / Granted/Filed) | Inventor/s Name | Title of the Patent | Applicant/s Name | Patent Filed Date (DD/MM/YYYY) | Patent Published Date / Granted Date (DD/MM/YYYY) | Patent Publication Number / Granted Number |
|---|---|---|---|---|---|---|---|---|---|---|
| 1 | 2023-2024 | MECH | 202341083399 | Published | Dr.R.Suresh Kumar Dr.M.Nirmala Mr.N.Hariharan Ms.Anci Manon Mary Dr.L.Vigneash Mr.G.Muthuram Mr.P.A.Prassath Mr.Palpandian P Mr.Govindaraj | DESIGN OF SMART SECURITY AND LIGHTING SYSTEM FOR BUILDING AUTOMATION | Dr.R.Suresh Kumar Dr.M.Nirmala Mr.N.Hariharan Ms.Anci Manon Mary Dr.L.Vigneash Mr.G.Muthuram Mr.P.A.Prassath Mr.Palpandian P Mr.Govindaraj | 7/12/2023 | 5/1/2024 | 1/2024 |
| 2 | 2023-2024 | MECH | 202341086383 | Published | Ganeshan Pushpanathan Laxmi Priya Karthikeyan Maniraja Kumar Raj Karuppusamy | ENHANCE THE SAFETY OF PASSENGERS IN PUBLIC TRANSPORTS BY USING IOT & MACHINE LEARNING TECHNIQUES | Sri Eshwar College of Engineering | 18/12/2023 | 12/1/2024 | 02/2024 |
| 3 | 2023-2024 | MECH | 202341086384 | Published | R. Vivek S. Venkatesh K. Sathish SA Vigneshvar | REAL TIME KINETIC – DRONE MAPPING METHOD | Sri Eshwar College of Engineering | 18/12/2023 | 12/1/2024 | 02/2024 |
| 4 | 2023-2024 | MECH | 202341087472 | Published | Dr. Bipin Kumar Singh Dr. P. Ganeshan Dr. Amit Kumar | ROBOTIC SYSTEM FOR AUTOMATIC GARBAGE COLLECTOR | Sri Eshwar College of Engineering | 21/12/2023 | 12/1/2024 | 02/2024 |
| 5 | 2023-2024 | MECH | 202341087475 | Published | Dr. Bipin Kumar Singh Dr. P. Ganeshan Dr. Amit Kumar | DESIGN AND DEVELOPMENT OF A NOVEL AUTOMATIC DOOR BELL | Sri Eshwar College of Engineering | 21/12/2023 | 12/1/2024 | 02/2024 |
| 6 | 2023-2024 | MECH | 202341088670 | Published | Dr. Amit Kumar Dr. Bipin Kumar Singh Dr. P. Ganeshan | DESIGN AND DEVELOPMENT OF A SOLAR-POWERED BLOWER USING SCRAP | Sri Eshwar College of Engineering | 26/12/2023 | 19/01/2024 | 03/2027 |
| 7 | 2023-2024 | MECH | 202341088677 | Published | Dr.SURESHBABU.Y ABINAV M M JEEVANANTHAM T SUDEEP V BARATH KUMAR S | DESIGN AND DEVELOPMENT OF E-BIKE | Sri Eshwar College of Engineering | 26/12/2023 | 19/01/2024 | 03/2028 |
| 8 | 2023-2024 | MECH | 202341089701 | Published | Dr.T.Ramakrishnan Dr.R.Suresh Kumar Dr.S.Venkatesh | AUTOMATIC SIDE STAND RETRIEVAL SYSTEM | Sri Eshwar College of Engineering | 29/12/2023 | 19/01/2024 | 03/2024 |
| 9 | 2023-2024 | MECH | 202341089703 | Published | Dr.S.Venkatesh Dr.R.Suresh Kumar Dr.T.Ramakrishnan | SUCTION SYSTEM FOR CAPTURING DUST FROM THE WOOD CUTTING MACHINE | Sri Eshwar College of Engineering | 29/12/2023 | 19/01/2024 | 03/2024 |
| 10 | 2023-2024 | MECH | 202441002587 | PUBLISHED | 1)Dr.R.Suresh Kumar 2)Dr.S.Sivakumar 3)Dr.M.Nirmala 4)Mr.P.A.Prassath 5)Dr.S.Sam Karthik 6)Ms.Sudha V 7)Mr.Lalit Bhanwrela 8)Mr.S.Rajesh 9)Mr.K.Sedhuramalingam | DESIGN AND CONTROL OF PV BASED ISOLATED POWER SUPPLY USING IQF CONTROLLER FOR AGRICULTURAL | 1)Dr.R.Suresh Kumar 2)Dr.S.Sivakumar 3)Dr.M.Nirmala 4)Mr.P.A.Prassath 5)Dr.S.Sam Karthik 6)Ms.Sudha V 7)Mr.Lalit Bhanwrela 8)Mr.S.Rajesh 9)Mr.K.Sedhuramalingam | 12/01/2024 | 09/02/2024 | 6/2024 |
| 11 | 2023-2024 | MECH | 202341088475 | PUBLISHED | Sathish K Aditya Krishna S Kamalapuram Mahaboob Basha Pravin R | DESIGN AND DEVELOPMENT OF HAND GESTURE CONTROLLED WHEEL CHAIR | Sri Eshwar College of Engineering | 23/12/2023 | 23/02/2024 | 08/2024 |
| 12 | 2023-2024 | MECH | 202441019810 | PUBLISHED | 1)Dr.R.Suresh Kumar 2)Dr.M.Nirmala 3)Dr.K.Thilagavathi 4)Mr.N.Hariharan 5)Ms.Manju.K 6)Mr.Maniprabhu K 7)Mr.Muniyappan R 8)Mr Harinesh J 9)Mr Nandeshwaran N | DESIGN AND IMPLEMENTATION OF VIRTUAL CONTROL IN INDUSTRIAL AUTOMATION | 1)Dr.R.Suresh Kumar 2)Dr.M.Nirmala 3)Dr.K.Thilagavathi 4)Mr.N.Hariharan 5)Ms.Manju.K 6)Mr.Maniprabhu K 7)Mr.Muniyappan R 8)Mr Harinesh J 9)Mr Nandeshwaran N | 18/03/2024 | 29/03/2024 | 13/2024 |
| Design Grant | ||||||||||
| 1 | 2023-2024 | Mech | 364665-001 | Granted | 1.Dr. SWARNAMBUJ SUMAN 2.Dr.P.GANESHAN 3. Dr. AMIT KUMAR SHARMA 4. Dr. UMAVATHI M | SUN TRACKING SOLAR PANEL | 1.Dr. SWARNAMBUJ SUMAN 2.Dr.P.GANESHAN 3. Dr. AMIT KUMAR SHARMA 4. Dr. UMAVATHI M | 24/05/2022 | 26/01/2024 | 04/2024 |
| SI No | ACY Year | Department | Patent Application Number | Status of Patent (Published / Granted/Filed) | Inventor/s Name | Title of the Patent | Applicant/s Name | Patent Filed Date (DD/MM/YYYY) | Patent Published Date / Granted Date (DD/MM/YYYY) | Patent Publication Number / Granted Number |
|---|---|---|---|---|---|---|---|---|---|---|
| 1 | 2022-2023 | MECH | 202341013025 | Published | 1)Dr. Bipin Kumar Singh 2)Dr. R Suresh Kumar 3)Dr. P. Ganeshan 4)Dr. Amit Kumar 5)Mr. K. Satish | A Flexible Battery Operated Palm Wheeler | Sri Eshwar College of Engineering | 27/02/2023 | 17/03/2023 | 11/2023 |
| 2 | 2023-2024 | MECH | 202341033145 | Published | 1)Abhimannyu Sharma 2)Dheeraj Kumar 3)Amit Kumar 4)Bipin Kumar Singh 5)R Suresh Kumar 6)P. Ganeshan | Design and development of a novel solar concentrating spittoon against COVID-19 | 1)Sri Eshwar College of Engineering | 05/11/2023 | 18/08/2023 | 33/2023 |
| 3 | 2023-2024 | MECH | 202341045089 | Published | 1)MOHANAVEL VINAYAGAM 2)P. GANESHAN 3)S. SURESH KUMAR 4)K. RAJA 5)A. THANIKASALAM 6)S. JACOB | Impact of nano Zinc oxide particles on the mechanical behavior of natural fiber reinforced polymer composites | 1)MOHANAVEL VINAYAGAM 2)P. GANESHAN 3)S. SURESH KUMAR 4)K. RAJA 5)A. THANIKASALAM 6)S. JACOB | 07/05/2023 | 1/9/2023 | 35/2023 |
| 4 | 2023-2024 | MECH | 202341069271 | Published | 1)Dr. R. Senthil Kumar 2)Ms. V. Pavithra 3)Mrs. Vidhyalakashmi R 4)Mr. P.A.Prassath 5)Dr. G. Gokilakrishnan 6)Mr. A.Kuppuswamy 7)Dr. Arun.S 8)Mr. Palpandian P 9)Mr. Govindaraj 10)Dr.S.Sam Karthik 11)Mrs.N.Abinaya 12)Mr. M.Shaileas Babu 13)Mrs. Thariga Shrinithi R 14)Mrs. Rasitha B 15)Mrs. Tejashwini.M | VISUALIZED CONTROL OF BRUSHLESS AUTO-CAR WASH SYSTEM USING INTELLIGENT CONTROLLER | 1)Dr. R. Senthil Kumar 2)Ms. V. Pavithra 3)Mrs. Vidhyalakashmi R 4)Mr. P.A.Prassath 5)Dr. G. Gokilakrishnan 6)Mr. A.Kuppuswamy 7)Dr. Arun.S 8)Mr. Palpandian P 9)Mr. Govindaraj 10)Dr.S.Sam Karthik 11)Mrs.N.Abinaya 12)Mr. M.Shaileas Babu 13)Mrs. Thariga Shrinithi R 14)Mrs. Rasitha B 15)Mrs. Tejashwini.M | 14/10/2023 | 24/11/2023 | 47/2023 |
| 5 | 2023-2024 | MECH | 202341069318 | Published | 1)V.Bharath Choudry 2)Dr.R.Shanmugasundaram 3)Dr.V.Parimala 4)Mr.Vinothkumar.A 5)Mr.P.Sridhar 6)Mrs.D.Chitra 7)Mr.Gokul Selvaraj 8)Mr.Joshua Daniel S 9)Dr.G.Gokilakrishnan | SERVO CONTROLLER BASED 4 AXIS POSITIONING SYSTEM | 1)V.Bharath Choudry 2)Dr.R.Shanmugasundaram 3)Dr.V.Parimala 4)Mr.Vinothkumar.A 5)Mr.P.Sridhar 6)Mrs.D.Chitra 7)Mr.Gokul Selvaraj 8)Mr.Joshua Daniel S 9)Dr.G.Gokilakrishnan | 14/10/2023 | 24/11/2023 | 47/2023 |
| 6 | 2023-2024 | MECH | 202341070468 | Published | 1)P.Ganeshan 2)Bimalendu Dash 3)Mukesh Panneerselvam 4)S Vivek 5)V Priya 6)V Sampath Kumar | EVALUATION OF STRENGTH AND MIX PROPORTIONS OF GRANITE DUST BRICKS | 1)P.Ganeshan 2)Bimalendu Dash 3)Mukesh Panneerselvam 4)S Vivek 5)V Priya 6)V Sampath Kumar | 17/10/2023 | 24/11/2023 | 47/2023 |
| DESIGN - INDIAN | ||||||||||
| 1 | 2022-2023 | MECH | 364969-001 | Granted | 1.Dr. B. MURALI 2 Dr. D. CHANDRAMOHAN 3. Dr. S. DINESH KUMAR 4. Dr. R. SURESH KUMAR | ELECTRONIC HELMET LOCK FOR TWO-WHEELERS | 27/05/2022 | 20/01/2023 | 03/2023 | |
| 2 | 2023-2024 | MECH | 392522-001 | Granted | 1.Mr. S. VINODH 2. Dr. S. SEENIVASAN 3. Mr. P SATISHKUMAR 4. Dr. BIBIN JOSE | MULTI TWISTED BLADES IN SOLAR WATER HEATER | 1.Mr. S. VINODH 2. Dr. S. SEENIVASAN 3. Mr. P SATISHKUMAR 4. Dr. BIBIN JOSE | 09/12/2023 | 3/11/2023 | 44/2023 |
| Utility Patent Grant | ||||||||||
| 1 | 2023-2024 | Mech | 202241062980 | Granted | 1)Dr.K.Millerjothi 2)Dr.K. Parthiban 3)Dr. A.Elayaperumal 4)Dr.R.Suresh Kumar 5)Dr.P.Ganeshan | CONVERSION OF LOW-DENSITY POLYETHYLENE PLASTICS (LDPE) POLYMERS INTO FUEL OIL THROUGH PYROLYSIS PROCESS | Sri Eshwar College of Engineering | 04/11/2022 | 09/05/2023 |
| S.NO | Department | Patent Application Number | Status of Patent (Published / Granted/Filed) | Inventor/s Name | Title of the Patent | Applicant/s Name | Patent Filed Date (DD/MM/YYYY) | Patent Published Date / Granted Date (DD/MM/YYYY) | Patent Publication Number / Granted Number |
|---|---|---|---|---|---|---|---|---|---|
| 1 | MECH | 202241006238 | Published | 1)DEEPAK GOWDA .L 2)DR. RAJ KUMAR 3)DR.T.RAMAKRISHNAN 4)DR. S. SARAVANAN 5)DR. GAVHANE VRUSHALI SOMANATH 6)DR. S. VELAYUTHAM 7)ARULKUMAR P 8)DR. VIVEKANAND B. JADHAV 9)PREM CHANDRA 10)SAMAYARAJ MURALI KISHANLAL 11)M.S RAVI THEJA 12)DR. MAKARAND UPADHYAYA | SMART SOLAR CELL EMBEDDED CLOTH CLEANSING MACHINE | 1)DEEPAK GOWDA .L 2)DR. RAJ KUMAR 3)DR.T.RAMAKRISHNAN 4)DR. S. SARAVANAN 5)DR. GAVHANE VRUSHALI SOMANATH 6)DR. S. VELAYUTHAM 7)ARULKUMAR P 8)DR. VIVEKANAND B. JADHAV 9)PREM CHANDRA 10)SAMAYARAJ MURALI KISHANLAL 11)M.S RAVI THEJA 12)DR. MAKARAND UPADHYAYA | 2/5/2022 | 2/18/2022 | 07/2022 |
| 2 | MECH | 202241007263 | Published | 1)DR. L.SELVAM 2)G. GOKILAKRISHNAN 3)DR. RAHUL RATNAKAR MAHAMUNI 4)DR YUVARAJ DURAISAMY 5)MRS R TAMILARASI 6)DR K AYYAR 7)ASHIRBAD SAHOO 8)SANJAY SINGH THAKUR 9)DHARMBIR SINGH 10)ENGR. SAJITH KUMAR R 11)DR SONU MISHRA 12)DR VIRENDRA GOMASE | SMART AND SAFE GAS FLOW PIPELINE BASED ON IOT FOR COOKING APPLIANCES | 1)DR. L.SELVAM 2)G. GOKILAKRISHNAN 3)DR. RAHUL RATNAKAR MAHAMUNI 4)DR YUVARAJ DURAISAMY 5)MRS R TAMILARASI 6)DR K AYYAR 7)ASHIRBAD SAHOO 8)SANJAY SINGH THAKUR 9)DHARMBIR SINGH 10)ENGR. SAJITH KUMAR R 11)DR SONU MISHRA 12)DR VIRENDRA GOMASE | 2/11/2022 | 2/25/2022 | 08/2022 |
| 3 | MECH | 202241020401 | Published | 1)Dr. A.NARASIMA VENKATESH 2)Dr. R. SURESH KUMAR 3)Mr. B.VIJAYA PRAKASH 4)Dr. A. ARUN NEGEMIYA 5)Dr. RADHIKA BASKAR 6)Mr. S.DINESHKUMAR | AI BASED FIRE FIGHTING ROBOTAI BASED FIRE FIGHTING ROBOT | 1)Dr. A.NARASIMA VENKATESH 2)Dr. R. SURESH KUMAR 3)Mr. B.VIJAYA PRAKASH 4)Dr. A. ARUN NEGEMIYA 5)Dr. RADHIKA BASKAR 6)Mr. S.DINESHKUMAR | 4/5/2022 | 4/15/2022 | 15/2022 |
| 4 | MECH | 202241034754 | Published | 1)Dr. N. Mathan kumar 2)Dr. S. Nagaraja 3)Mr.S.Sabarinath 4)Mr.S.Ragunanthan 5)Mr. D. Sanjeevi rao 6)Mr.K.Yogananth 7)Dr.P. Ganeshan | DESIGN AND FABRICATION OF AUTOMATIC PNEUMATIC EMERGENCY EXIT FOR AUTOMOBILE | 1)Dr. N. Mathan kumar 2)Dr. S. Nagaraja 3)Mr.S.Sabarinath 4)Mr.S.Ragunanthan 5)Mr. D. Sanjeevi rao 6)Mr.K.Yogananth 7)Dr.P. Ganeshan | 6/17/2022 | 6/24/2022 | 25/2022 |
| 5 | MECH | 202241057649 | Published | 1)Dr.S.Venkatesh 2)Dr.R.Suresh Kumar 3)Dr.T.Ramakrishnan 4)Dr.G.Gokilakrishnan 5)Dr.Y.Sureshbabu 6)Dr.V.Naveenprabhu 7)Dr.P.Ganeshan 8)Dr.S.Ganeshkumar 9)Mr.A.Vimal 10)Mr.R.Vivek | Convergent Divergent Type Inlet Particle Separator | Sri Eshwar College of Engineering | 10/8/2022 | 10/14/2022 | 41/2022 |
| 6 | MECH | 202241058301 | Published | 1)Dr.P.Ganeshan 2)Dr.R.Suresh Kumar 3)Dr.Bipin Kumar Singh 4)Dr.Amit Kumar 5)Dr.T.Ramakrishnan 6)Dr.V.Naveenprabhu 7)Mr.K.Sathish 8)Mr.S.Gokul 9)Mr.N.Vishnu Sakravarthy 10)Dr.K.Millerjothi 11)Dr.Y.Sureshbabu | Automatic Water Filling System Using Arduino | Sri Eshwar College of Engineering | 10/12/2022 | 10/21/2022 | 42/2022 |
| 7 | MECH | 202241058709 | Published | 1)Dr.T. Ramakrishnan 2)Dr.R.Suresh Kumar 3)Dr.K.Millerjothi 4)Dr.G.Gokilakrishanan 5)Dr.S.Venkatesh 6)Dr.Y.Sureshbabu 7)Dr.V.Naveenprabhu 8)Dr.S.Ganeshkumar 9)Mr.S.Gokul 10)Mr.R.Vivek | DESIGN AND FABRICATION OF BIOMASS BREQUETTING MACHINE | Sri Eshwar College of Engineering | 10/14/2022 | 11/11/2022 | 45/2022 |
| 8 | MECH | 202241059429 | Published | 1)Dr.K.Millerjothi 2)Dr.R.Suresh Kumar 3)Dr.P.Ganeshan 4)Dr.G.Gokilakrishanan 5)Dr.T.Ramakrishnan 6)Dr.S.Venkatesh 7)Dr.S.Ganeshkumar 8)Dr.Y.Sureshbabu 9)Dr.V.Naveenprabhu 10)Dr.Bipin Kumar Singh 11)Dr.Amit Kumar | Experimental Investigation on the effect of different reflecting surface by using Box type Solar cooker | Sri Eshwar College of Engineering | 10/18/2022 | 10/28/2022 | 43/2022 |
| 9 | MECH | 202241059740 | Published | 1)Mr.K.Sathish 2)Dr.S.Ganeshkumar 3)Dr.T.Ramakrishnan 4)Dr.G.Gokilakrishanan 5)Dr.P.Ganeshan 6)Dr.K.Millerjothi 7)Dr.R.Suresh Kumar 8)Dr.Y.Sureshbabu 9)Dr.S.Venkatesh 10)Dr.V.Naveenprabhu 11)Dr.Bipin Kumar Singh | Smart Soil Testing Machine | Sri Eshwar College of Engineering | 10/19/2022 | 10/28/2022 | 43/2022 |
| 10 | MECH | 202241059741 | Published | 1)Dr.V.Naveenprabhu 2)Mr.N.VishnuSakravarthy 3)Mr.S.Gowtham 4)Mr.R.Vivek 5)Mr.S.Gokul 6)Dr.Amit Kumar 7)Mr.K.Sathish 8)Mr.A.Vimal 9)Dr.S.Venkatesh 10)Dr.Y.Sureshbabu 11)Dr.Bipin Kumar Singh | IOT BASED COAL MINE SAFETY SYSTEM USING NODE MCU | Sri Eshwar College of Engineering | 10/19/2022 | 10/28/2022 | 43/2022 |
| 11 | MECH | 202241061075 | Published | 1)Dr.Y.Sureshbabu 2)Dr.P.Ganeshan 3)Dr.R.Suresh Kumar 4)Mr.R.Vivek 5)Mr.S.Gokul 6)Dr.Amit Kumar 7)Mr.K.Sathish 8)Mr.A.Vimal 9)Dr.S.Venkatesh 10)Dr.V.Naveenprabhu 11)Dr.Bipin Kumar Singh | Copper Chromium Zirconium Coated Piston Run By Biodiesel Operated IC Engine Test Rig | Sri Eshwar College of Engineering | 10/27/2022 | 11/4/2022 | 44/2022 |
| 12 | MECH | 202241061076 | Published | 1)Vivek R 2)Dr. Amit Kumar 3)Mr. K. Sathish 4)Mr. A. Vimal 5)Mr. S. Gokul 6)Mr. S. Gowtham 7)Mr. N. Vishnu sakkaravarthy 8)Dr. Bipin Kumar Singh 9)Dr. V. Naveen prabhu 10)Dr. S. Venkatesh 11)Dr. Y. Sureshbabu | IoT based Water Quality Management systems | Sri Eshwar College of Engineering | 10/27/2022 | 11/18/2022 | 46/2022 |
| 13 | MECH | 202241062980 | Published | 1)Dr.K.Millerjothi 2)Dr.K. Parthiban 3)Dr. A.Elayaperumal 4)Dr.R.Suresh Kumar 5)Dr.P.Ganeshan | CONVERSION OF LOW-DENSITY POLYETHYLENE PLASTICS (LDPE) POLYMERS INTO FUEL OIL THROUGH PYROLYSIS PROCESS | Sri Eshwar College of Engineering | 11/4/2022 | 11/18/2022 | 46/2022 |
| 14 | MECH | 202241064206 | Published | 1)Mr.A.VIMAL 2)Dr.S.VENKATESH 3)Mr.K.SATHISH 4)Mr.S.GOKUL 5)Mr.S.GOWTHAM 6)Mr.N.VISHNU SAKRAVARTHY 7)Dr.BIPIN KUMAR SINGH 8)Dr.V.NAVEENPRABHU 9)Dr.Y.SURESHBABU 10)Mr.R.VIVEK 11)Dr.K.MILLERJOTHI | Test Equipment for Hydrocyclone Performance Experimentation | Sri Eshwar College of Engineering | 11/10/2022 | 11/18/2022 | 46/2022 |
| 15 | MECH | 202241064427 | Published | 1)Dr.S.Ganeshkumar 2)Dr.R.Suresh Kumar 3)Dr.T. Ramakrishnan 4)Dr.P.Ganeshan 5)Dr.K.Millerjothi 6)Dr.G.Gokilakrishanan 7)Dr.S.Venkatesh 8)Dr.Y.Sureshbabu 9)Dr.V.Naveenprabhu 10)Dr.V.Mohanavel 11)Dr.K.Raja 12)Mr.R,Vivek | Tool Wear Monitoring and Prediction Through Data Logging and Machine Learning Model in Turning Operation | Sri Eshwar College of Engineering | 11/10/2022 | 11/25/2022 | 47/2022 |
| 16 | MECH | 202241069533 | Published | 1)Dr M.Vigneshkumar 2)Dr P Ashoka Varthanan 3)Dr.G Gokilakrishnan 4)Dr S Senthil Murugan, 5)Mr N Gobikrishnan 6)Mr S Bhuvan lakshman 7)Mr A Dhayanithi 8)Mr E Barath Raj 9)Mr A Ebbi Arul Sherwin 10)Mr R S Bavithran 11)Mr Kabilan K 12)Mr S Aswinkumar 13)Mr Akash V M 14)Mr. Vignesh T | DEVELOPMENT OF DUCT FOR HOVERBOARD SYSTEM FOR BETTER EFFICIENCY | 1)Dr M.Vigneshkumar 2)Dr P Ashoka Varthanan 3)Dr.G Gokilakrishnan 4)Dr S Senthil Murugan, 5)Mr N Gobikrishnan 6)Mr S Bhuvan lakshman 7)Mr A Dhayanithi 8)Mr E Barath Raj 9)Mr A Ebbi Arul Sherwin 10)Mr R S Bavithran 11)Mr Kabilan K 12)Mr S Aswinkumar 13)Mr Akash V M 14)Mr. Vignesh T | 12/2/2022 | 12/9/2022 | 49/2022 |
| S.No | Title of the Project | Names of the Principal Invigilators | Date of Issuing Sanction Order | Department | Duration | Amount of Seed Money Sanctioned (Rs.) |
|---|---|---|---|---|---|---|
| 1 | IoT Platform for Industry 5.0 Integration | Dr. S. Ganeshkumar | 26- Jun-2024 | Mech | 2024-2025 | 335,627 |
| Total | 335,627 |
| S.No | Title of the Project | Names of the Principal Invigilator | Date of Issuing Sanction Order | Department | Duration | Amount of Seed Money Sanctioned (Rs.) |
|---|---|---|---|---|---|---|
| 1 | Procurement of Energy Audit Instruments | Dr.N.K.Millejothi, Prof | 04-10-2023 | Mech | 2023-2024 | 399,481 |
| 2 | Experimental Investigation on Emissions and Performance Characteristics of a ethanol | Dr. Y. Sureshbabu | 04-10-2023 | Mech | 2023-2024 | 200000 |
| 3 | Improving Hydrothermal performance of Heat Exchanger Using Enhancer and Nano-fluids | Dr.Amit Kumar, AP Dr.Bipin Kumar Singh, AP Dr.P.Ganeshan, Prof | 04-10-2023 | Mech | 2023-2024 | 215,000 |
| 4 | Design and Development of Novel plant derived | Dr. T. Ramakrishnan,ASP Dr. R. Sureshkumar,Prof Dr.S. Venkatesh, ASP | 04-10-2023 | Mech | 2023-2024 | 358,000 |
| Total | 1,172,481 |
| S.No | Title of the Project | Names of the Principal Invigilator | Date of Issuing Sanction Order | Department | Duration | Amount of Seed Money Sanctioned (Rs.) |
|---|---|---|---|---|---|---|
| 1 | E-Vehicle | Mr.S.Gowtham, AP Mr.K.Sathish, AP | 08 Oct 2022 | Mech | 2022-2023 | 400,000 |
| Total | 400,000 |
COME JOIN US TO
EXPERIENCE LEARNING
AT ITS BEST!