Sri Eshwar Engineering College

MECHANICAL - RESEARCH

S.NoRef. NoSupervisor NameDepartmentResearch AreaCurrent Scholar under their supervisionSlot available under their supervision
13320033Dr.P.GaneshanMECHComposite Materials, Materials and Metallurgical Engineering, Design and Optimization, Manufacturing Engineering100
23320058Dr.T. RamakrishnanMECHComposite Materials, Natural Fiber Reinforced Composite, Tribology and Machining62
33320057Dr.S. VenkateshMECHComputational Fluid Dynamics, Optimization, Pollution Control Equipments44
44220038Dr. S. Ganesh KumarMECHTool Condition Monitoring, Smart Manufacturing, Tool Insert Coatings, Tool Wear13
54120115Dr. Amit KumarMECHThermal and Fluid Engineering, Solar Energy, Heat Transfer, Nano-Particle/Fluid04
64120181Dr. Bipin Kumar SinghMECHCeramic Manufacturing Composites Optimization13
78720240Dr. N.K. MillerjothiMECHEngg. Internal Combustion Engines, Alternate Fuels08
84220046Dr. V. NaveenprabhuMECHHeat Transfer, Refrigeration, Renewable Energy, CFD04
94220088Dr. Y. SureshbabuMECHSurface Coating, Alternate Fuel, IC Engine Emission04
102550012Dr.M. KarthikeyanMECHTextile Technology, Nano Technology, Protective Clothing, Heat Stress Assessment, Environment Assessment08
114420013Dr.R. Suresh KumarMECHMetal Matrix Composites, Machinability Studies, Optimization, Tribological Studies08
S.NoResearch CentreSupervisor NameScholar NameAnna University Registration NumberYear of RegistrationFull time / Part time
1MECHANICALDr. Bipin Kumar SinghMr. A. Selvarasu23132791167Jan-24Part Time
2MECHANICALDr. Ganesh Kumar. SMr. S.Gokul24142691115Jan-24Part Time
3MECHANICALDr. Ganeshan.PMr.M S Ravi Teja21192891145Jan-21Full Time
4MECHANICALDr. Ganeshan.PMr.B.M.Gnanasekaran21142891278Jan-21Part Time
5MECHANICALDr. Ganeshan.PMr.J.Gnanaraj21142891253Jan-21Part Time
6MECHANICALDr. Ganeshan.PMs.Sravani Yaramala21252897186Jul-21Full Time
7MECHANICALDr. Ganeshan.PMr.P.A.Nigalashik21182897161Jul-22Part Time
8MECHANICALDr. Ganeshan.PMr.T.Rajesh21132897288Jul-22Part Time
9MECHANICALDr. Ganeshan.PMs. J. Jeswin Roshini23241791117Jan-23Full Time
10MECHANICALDr. Ganeshan.PMr.U.Prakash23144697184Jul-23Part Time
11MECHANICALDr. Ganeshan.PMr.C.Vasantha Kumar23134697280Jul-23Part Time
12MECHANICALDr. Ganeshan.PMr. P . Elumalai23122697321Jul-23Part Time
13MECHANICALDr. Ramakrishnan.TMr.K. Aravinth21142697263Jul-21Full Time
14MECHANICALDr. Ramakrishnan.TMr.S. Gowtham22142691170Jan-22Part Time
15MECHANICALDr. Ramakrishnan.TMr.R. Sathish22142691134Jan-22Part Time
16MECHANICALDr. Ramakrishnan.TMr.M.Navin22142697186Jul-22Part Time
17MECHANICALDr. Ramakrishnan.TMr.T. Praveenkumar22142697165Jul-22Full Time
18MECHANICALDr. Ramakrishnan.TMr.S.Vinodh23142691179Jan-23Full Time
19MECHANICALDr. Venkatesh.SMr.J.Edison Thangaraj21142697283Jul-21Part Time
20MECHANICALDr. Venkatesh.SMr.A.Vimal22142691155Jan-22Part Time
21MECHANICALDr. Venkatesh.SMr.R. Vivek21142697137Jul-22Part Time
22MECHANICALDr. Venkatesh.SMs. S. Kousalya Devi24222691114Jan-24Part Time
S.NoDepartmentName of the Doctorates
1MECHDr. Ganeshan P
2MECHDr. Karthikeyan M
3MECHDr.Amit Kumar
4MECHDr.Bipin Kumar Singh
5MECHDr.Ganeshkumar S
6MECHDr.Gokilakrishnan G
7MECHDr.Karuppusami G
8MECHDr.Miller Jothi N K
9MECHDr.Naveenprabhu V
10MECHDr.Ramakrishnan T
11MECHDr.Sathish K
12MECHDr.Sugumaran B
13MECHDr.Suresh Babu Y
14MECHDr.Suresh Kumar R
15MECHDr.Suresh R K
16MECHDr.Venkatesh S
S. No.PublicationsYear
1Rajaram R.S., Babu P.K., Victor K., Kandasamy R., Pushpanathan G., Sivakumar V., Pushpanathan R., Vinayagam M., Barathy S., "Fuzzy Logic-based Power Optimizer for Solar Photovoltaic Power Systems", Pertanika Journal of Science and Technology, 32, (S1),2024, DOI: 10.47836/pjst.32.S1.062024
2Kumar M., Singh M., Kumar A., Kumar A., Kamble D., "Comparison of plastic collapse moment for different angled non-circular pipe bends under bending moments and internal pressure", Journal of the Brazilian Society of Mechanical Sciences and Engineering, 46, (4),2024, DOI: 10.1007/s40430-024-04810-42024
3Narayanan M.J., Balakrishnan K., Kumar N.V., Radhakrishnan S., "Development of microcontroller based technology for automatic safety control of vehicle braking system - A review", AIP Conference Proceedings, 3035, (1),2024, DOI: 10.1063/5.01946332024
4Yessian S., Thangavel A.R., Natraj S., Madhusuthanan S.V.R., Mahendran V.K., "Review on automatic over-load indication system", AIP Conference Proceedings, 3035, (1),2024, DOI: 10.1063/5.01953422024
5Pushpanathan G., Muthusamy B., Mohan K., Vaikundapermual R.C., "Future enhanced control movement of patients stretcher", AIP Conference Proceedings, 3035, (1),2024, DOI: 10.1063/5.01945582024
6Ramana Murty Naidu S.C.V., Kalidas N., Venkatachalam S., Mukuloth S., Asary A.R., Naveenprabhu V., Vishnu R., Vellingiri S., "Microstructure, Worn Surface, Wear Assessment and Taguchi's Approach of Titanium Alloy Hybrid Metal Matrix Composites for Automotive Applications", SAE Technical Papers, , (2024, DOI: 10.4271/2023-01-51032024
7Gautam S.K., Singh B.K., "Investigation on the effects of isothermal holding temperature and time on the coarsening mechanism and rheological properties of ADC12 Al semi-solid slurry", Materials Chemistry and Physics, 314, (2024, DOI: 10.1016/j.matchemphys.2023.1288132024
8Kumar V., Prasad Singh G., Kumar M., Kumar A., Singh P., Ansu A.K., Sharma A., Alam T., Yadav A.S., Dobrotă D., "Nanocomposite Marvels: Unveiling Breakthroughs in Photocatalytic Water Splitting for Enhanced Hydrogen Evolution", ACS Omega, 9, (6),2024, DOI: 10.1021/acsomega.3c078222024
9Faisal N., Kumar D., Kumar A., Ansu A.K., Sharma A., Jain A.K., Alkahtani M.Q., Yunus Khan T.M., Almakayeel N., "Experimental Analysis for the Performance Assessment and Characteristics of Enhanced Magnesium Composites Reinforced with Nano-Sized Silicon Carbide Developed Using Powder Metallurgy", ACS Omega, 9, (5),2024, DOI: 10.1021/acsomega.3c050892024
10Kumar D., Layek A., Kumar A., Kumar R., "Experimental Study for the Enhancement of Thermal Efficiency and Development of Nusselt Number Correlation for the Roughened Collector of Solar Air Heater", Journal of Thermal Science and Engineering Applications, 16, (2),2024, DOI: 10.1115/1.40639152024
11Rai A.K., Ganeshan P., Almoallim H.S., Alharbi S.A., Raghavan S.S., "Automated Deep Learning Model with Optimization Mechanism for Segmenting Leukemia from Blood Smear Images", Fluctuation and Noise Letters, 23, (1),2024, DOI: 10.1142/S02194775245000562024
12Yuvaperiyasamy M., Senthilkumar N., Deepanraj B., Gokilakrishnan G., Premkumar R., "Application of response surface methodology and neural networks in pyramid solar still for seawater desalination: An optimization and prediction strategy", Global Nest Journal, 26, (4),2024, DOI: 10.30955/gnj.0057732024
13Ramalingam S.K., Subramaniyam B.M., Karuppusamy A., Radhakrishnan S., "Green machinability studies on SAE 8822 alloy steel using RSM and taguchi method", Revista Materia, 29, (2),2024, DOI: 10.1590/1517-7076-RMAT-2024-00192024
14Kumar M., Kumar A., Kumar A., Kumar A., Kamble D., "Development of new improved plastic collapse moment equations of pressurized different angled pipe bends under bending moments", Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, , (2024, DOI: 10.1177/095440892412484282024
15Sahu M.K., Kumar A., Choudhary T., Ansu A.K., "Improvement of Aerodynamic Performance of Aerofoil Design by Using Shark Skin Inspired Denticles", Lecture Notes in Mechanical Engineering, , (2024, DOI: 10.1007/978-981-97-0918-2_502024
16Babu D.P.R., Devasenan M., Pushpanathan G., Raju M., "Performance Evaluation of UAV Airfoil Under Various Ground Conditions", Pertanika Journal of Science and Technology, 32, (Sp1),2024, DOI: 10.47836/pjst.32.S1.022024
17Kumar R.S., Vinodh S., Satishkumar P., Seenivasan S., "Evaluation of machinability performance of T51603 using response surface methodology and grey relational analysis", Revista Materia, 29, (1),2024, DOI: 10.1590/1517-7076-RMAT-2023-03222024
18Millerjothi N.K., Gebreslassie M.G., Nithyanandhan T., Sachuthananthan B., "Assessment of Detailed Energy Conservation Potentials: The Case of the Ethiopian Leather Industry", Pertanika Journal of Science and Technology, 32, (Sp1),2024, DOI: 10.47836/pjst.32.S1.032024
19Savarimuthu L.J., Victor K., Davaraj P., Pushpanathan G., Kandasamy R., Pushpanathan R., Vinayagam M., Barathy S., Sivakumar V., "Solar Energy Prediction Based on Intelligent Predictive Controller Algorithm", Pertanika Journal of Science and Technology, 32, (S1),2024, DOI: 10.47836/pjst.32.S1.052024
20NagarajaGanesh B., Rekha B., Kailasanathan C., Ganeshan P., Mohanavel V., "Sustainable fiber extraction and determination of mechanical and wear properties of Borassus flabellifer sprout fiber-reinforced polymer composites", Biomass Conversion and Biorefinery, , (2024, DOI: 10.1007/s13399-024-05480-x2024
21Gebru T., Millerjothi N.K., Raj N.M., Seenivasan S., "Energy Utilization and Production Assessment in a Cement Industry", Pertanika Journal of Science and Technology, 32, (Sp1),2024, DOI: 10.47836/pjst.32.S1.042024
22Raja K., Dhanabal M., Singh B.K., Ganeshan P., "Comparative study between hot isostatic pressing and pressure less sintering for self-lubricating CuO/ZTA composites", Journal of Ceramic Processing Research, 25, (1),2024, DOI: 10.36410/jcpr.2024.25.1.792024
23Babu K.A., Paramasivam B., Vijayananth K., Seenivasan V., Raju S., "Effect of eggshell powder on polyvinyl ester composite: A statistical correlation on mechanical strength", Environmental Progress and Sustainable Energy, , (2024, DOI: 10.1002/ep.143822024
24Nithyanandan N., Gokilakrishnan G., Manoj Kumar S., Hanish Anand S., "Characterization of heat-treated biosilica from biomass waste fox tail millet husks and banana fiber reinforced epoxy composite", Biomass Conversion and Biorefinery, , (2024, DOI: 10.1007/s13399-024-05411-w2024
25G R., Gokilakrishnan G., V C U., S S.K., "Mechanical, wear, and flammability of chitin-rich endoskeleton of Sepioteuthis Sepioidea powder-dispersed pineapple fiber-reinforced polyester composite", Biomass Conversion and Biorefinery, , (2024, DOI: 10.1007/s13399-024-05345-32024
26Manickaraj K., Ramamoorthi R., Ramakrishnan T., Karuppasamy R., "Enhancing solid waste sustainability with iroko wooden sawdust and african oil bean shell particle-strengthened epoxy composites", Global Nest Journal, 26, (1),2024, DOI: 10.30955/gnj.0054672024
27Gopal P.M., Kavimani V., Sudhagar S., Sonar T., Venkatesh S., "Optimization of wire-cut EDM parameters using Taguchi and entropy coupled COPRAS approach for machining of CRT glass powder reinforced magnesium surface composite developed using friction stir processing", International Journal on Interactive Design and Manufacturing, , (2024, DOI: 10.1007/s12008-023-01705-x2024
28Vijaya G., Muralidhar S.M., Kumar M., Kumar A., Ashok Kumar M.S., Kumar D., Pandey S., Hasnain S.M.M., Singh A.K., Kumar G., "Nano indentation studies on ceramic thinfilms coatings deposited using sputtering process for energy applications", Materials Science for Energy Technologies, 7, (2024, DOI: 10.1016/j.mset.2023.08.0012024
29Raman R., Gor M., Meenakshi R., Jayaseelan G.M., Chaturvedi A., Taqui S.N., Ganeshan P., Ouladsmane M., Kalam M.A., "Solar Energy Measurement and Monitoring Model by Using Internet of Things", Electric Power Components and Systems, 52, (10),2024, DOI: 10.1080/15325008.2023.22464812024
30Singh M M., Kumar M., Sivaiah P., G. V., Kumar A., Kumar D., Pandey S., Singh A.K., Deifalla A.F., Hasnain S.M.M., "Simulation of metal ceramic single layer coatings for solar energy applications", Materials Science for Energy Technologies, 7, (2024, DOI: 10.1016/j.mset.2023.06.0032024
31Balasubramanian B., Raja K., Vignesh Kumar V., Ganeshan P., "Characterization study of Holoptelea integrifolia tree bark fibres reinforced epoxy composites", Natural Product Research, 38, (7),2024, DOI: 10.1080/14786419.2022.21375052024
32Singh B.K.; Gautam S.K.; Anand A.; Singh R.K.; Tiwari S.K.; Subhani A.R.; Upadhyaya R., "Parametric study to investigate mechanical properties of welded dissimilar Al6063 and Al 7073 alloys through FSW process", Engineering Research Express, 6, (3),2024, DOI: 10.1088/2631-8695/ad5f792024
33Saka A.; Jule L.T.; Badassa B.; Gudata L.; Nagaprasad N.; Shanmugam R.; Dwarampudi L.P.; Seenivasan V.; Ramaswamy K., "Biosynthesis of TiO2 nano particles by using Rosemary (Rosmarinus officinalis) leaf extracts and its application for crystal dye degradation under sunlight", BMC Chemistry, 18, (1),2024, DOI: 10.1186/s13065-024-01229-92024
34Paulsingarayar S.; Suresh Kumar R.; Vijayakumar S.J.D.; Kumar N.M., "Multi-criteria decision-making and artificial bee colony algorithm for optimization of process parameters in pyramid solar still", Desalination and Water Treatment, 319,2024, DOI: 10.1016/j.dwt.2024.1005432024
35Ramesh G.; Gokilakrishnan G.; Jayaraja B.G.; Patil P.P., "High-content Al-T6/pineapple fiber/brass mesh reinforcements on nanosilica-toughened epoxy hybrid natural fiber metal laminate composite for aircraft applications", Biomass Conversion and Biorefinery, 14, (13),2024, DOI: 10.1007/s13399-022-03354-82024
36Kumar R.; Singh B.K.; Kumar A.; Kumar A.; Kumar A.; Kumar P., "Integrating selective flocculation techniques for enhanced efficiency in manufacturing processes: A novel approach through artificial neural network modeling", Journal of Alloys and Metallurgical Systems, 7,2024, DOI: 10.1016/j.jalmes.2024.1000882024
37Kumar R.R.; Kumar A.; Kumar A.; Ansu A.K.; Goyal A.; Saxena K.K.; Prakash C.; Prasad J.L., "Thermal simulation on friction stir welding of AA6061 aluminum alloy by computational fluid dynamics", International Journal on Interactive Design and Manufacturing, 18, (5),2024, DOI: 10.1007/s12008-023-01311-x2024
38Kavimani V.; Paramasivam B.; Sasikumar R.; Venkatesh S., "A CRITIC integrated WASPAS approach for selection of natural and synthetic fibers embedded hybrid polymer composite configuration", Multiscale and Multidisciplinary Modeling, Experiments and Design, 7, (3),2024, DOI: 10.1007/s41939-023-00301-62024
39Singh B.K.; Kumar A.; Cep R.; Kumar A.; Kumar A.; Dogra N.; Logesh K., "Behavior of CuO as solid lubricant inside ZTA matrices", AIP Advances, 14, (8),2024, DOI: 10.1063/5.02135532024
40Das A.K.; Singh R.K.; Gupta N.; Kumar A.; Dwivedi Y.D.; Rana S.C.; Roy M.; Singh P.; Ansu A.K.; Goyal A.; Gupta M., "Comparative study using renormalized group k-ɛ, realizable k-ɛ, and standard k-ɛ models for flow through S-shaped diffuser", International Journal on Interactive Design and Manufacturing, 18, (5),2024, DOI: 10.1007/s12008-023-01609-w2024
41Sugumaran B.; Neme I., "Effect of adsorption interactions of Arabic gum with cement", Materials Research Express, 11, (6),2024, DOI: 10.1088/2053-1591/ad51d82024
42Gunasekar P.; Anderson A.; Sabari K.; Kumar R.S.; Saravanakumar S.; Yuvaperiyasamy M., "Hygral Analysis and Mechanical Strength Evaluation of TiO2 Nanoparticle-enhanced Natural Fiber Reinforced Epoxy Composites", Journal of Environmental Nanotechnology, 13, (2),2024, DOI: 10.13074/jent.06.2425782024
43Gunasekar P.; Anderson A.; Saravanakumar S.; Suresh Kumar R.; Yuvaperiyasamy M.; Sabari K., "Synergistic Effects of Bamboo and Jute Fiber Integration in Geopolymer Composites", Journal of Environmental Nanotechnology, 13, (2),2024, DOI: 10.13074/jent.2024.06.2426292024
44Kumar Murmu S.; Chattopadhayaya S.; Cep R.; Kumar A.; Kumar A.; Kumar Mahato S.; Kumar A.; Ranjan Sethy P.; Logesh K., "Exploring tribological properties in the design and manufacturing of metal matrix composites: an investigation into the AL6061-SiC-fly ASH alloy fabricated via stir casting process", Frontiers in Materials, 11,2024, DOI: 10.3389/fmats.2024.14159072024
45Prabhu P.; Gokilakrishnan G.; Hanish Anand S.; Kavitha C., "Comparative analysis of tamarind shell biomass powder and roasted chickpeas powder in kenaf fiber reinforced vinyl ester composite", Biomass Conversion and Biorefinery, 2024, DOI: 10.1007/s13399-024-05888-52024
46Chithra N.V.; Karuppasamy R.; Manickaraj K.; Ramakrishnan T., "Effect of Reinforcement Addition on Mechanical Behavior of Al MMC - A Critical Review", Journal of Environmental Nanotechnology, 13, (2),2024, DOI: 10.13074/jent.2024.06.2426322024
47Gokilakrishnan G.; Varthanan P.A.; Sreeharan B.N.; Nidhyapathi C.; Kavitha N.; Rajendran C., "Simulation based swarm intelligence optimization to develop manufacturing distribution plan", International Journal on Interactive Design and Manufacturing, 2024, DOI: 10.1007/s12008-024-01980-22024
48Kumar A.; Kumar D.; Faisal N.; Sharma A.; Kumar Ansu A.; Goyal A.; Saxena K.K.; Prakash C.; Kumar D., "Application of 3D printing technology for medical implants: a state-of-the-art review", Advances in Materials and Processing Technologies, 10, (2),2024, DOI: 10.1080/2374068X.2023.21937882024
49Vasanth Kumar D., Srinivasan N., Davis Hans S.J., Gokul S., Arulmurugan B., Sathishkumar B., "Additive Manufacturing of Nanoscale and Microscale Materials", Additive Manufacturing with Novel Materials: Processes, Properties and Applications, , (2024, DOI: 10.1002/9781394198085.ch82024
50Verma S.K., Verma R., Singh B.K., Sinha R.S., "Management of Intelligent Transportation Systems and Advanced Technology", Energy, Environment, and Sustainability, Part F2419, (2024, DOI: 10.1007/978-981-97-0515-3_82024
51Verma R., Singh B.K., Zahidi F., "Management of GPS Tracking Systems in Transportation", Energy, Environment, and Sustainability, Part F2419, (2024, DOI: 10.1007/978-981-97-0515-3_112024
52Gokilakrishnan G., Ashoka Varthanan P., Sreeharan B.N., Nithiyapathi C., Kavitha N., Rajendran C., "Correction: Simulation based swarm intelligence optimization to develop manufacturing distribution plan (International Journal on Interactive Design and Manufacturing (IJIDeM), (2024), 10.1007/s12008-024-01980-2)", International Journal on Interactive Design and Manufacturing, 2024, DOI: 10.1007/s12008-024-02053-02024
53Suresh Kumar R.; Naveen S.; Suresh V.; Madhu S., "Novel Approach to Monitoring the Surface Integrity of Aluminum 5052 Using Sound and Vibration Signals during Turning with Titanium-Coated Carbide Inserts", Journal of Materials Engineering and Performance, ,2024, DOI: 10.1007/s11665-024-09883-92024
54Kumar D., Kumar A., Amit K., Banerjee P., "Role of Nano Composite in Additive Technologies: A State of Art Review", Springer Tracts in Additive Manufacturing, Part F32552024, DOI: 10.1007/978-3-031-37671-9_132024
55Sivalingam V., Thirumalaisamy R., "Microstructure and Corrosion Study on Friction Surfaced Aluminum Alloy Coatings over Mild Steel", Periodica Polytechnica Chemical Engineering, 68, (3),2024, DOI: 10.3311/PPch.370182024
56Praveen S., Marimuthu S., Alqahtani B., Bharathiraja G., Gokilakrishnan G., "Enhancing Bulb Turbine Performance Assessing Air Injection for Vibration Mitigation and Hydrofoil Cavitation", Journal of Applied Fluid Mechanics, 17, (11),2024, DOI: 10.47176/jafm.17.11.26862024
57Annadate P., Bhat A., Bojjawar S., Patidar H., Prassath P.A., Gokul S., "AI Based Virtual Laboratory Using Intelligent Controller with CC-Link Remote IO Module", 2nd International Conference on Sustainable Computing and Smart Systems, ICSCSS 2024 - Proceedings, 2024, DOI: 10.1109/ICSCSS60660.2024.106249952024
58Saravanakumar, Jayapathy H., Rahul, Jothi M., "Thermal Power in India—Past, Present, and Future Perspectives", Lecture Notes in Mechanical Engineering, 2024, DOI: 10.1007/978-981-97-4500-5_182024
59Sathish K., Vanchimuthu C., Thiyagarajan V., Bavadharani C., Ramamoorthi R., "Investigation on the Performance of Draft Tube by Numerical and Experimental Approach: A Review", Lecture Notes in Mechanical Engineering, 2024, DOI: 10.1007/978-981-97-4500-5_242024
60Kumar R., Singh B.K., Kumar A., Ansu A.K., Goyal A., Saxena K.K., Gupta M., Agarwal M.K., "Design of water distribution pipes alongside modeling and simulation of water distribution system for efficient management", International Journal on Interactive Design and Manufacturing, 1882024, DOI: 10.1007/s12008-023-01436-z2024
61Ramu S., Gebremicheal G.H., Mohan R., Kumar R.S., Karthigairajan M., Masannan V., Yuvaperiyasamy M., Durga S., "Alkali and Non-alkali Treated Coconut Coir Fiber-Reinforced Coconut Shell Powder/MWCNT-Filled Polyester Matrix Composite: An Experimental Comparison", Journal of Environmental Nanotechnology, 1332024, DOI: 10.13074/jent.2024.09.2438932024
62Justin Raj Y., Bovas Herbert Bejaxhin A., Madhumitha R., Anitha A.S., Gehani H., Abdullah A., Naveenprabhu V., "Experimental Analysis of EDM Parameters on D2 Die Steel Using Nano-aluminum Composite Electrodes", Journal of Environmental Nanotechnology, 1332024, DOI: 10.13074/jent.2024.06.2438482024
63Prabu R., Yuvaraj G., Saravanan G., Pradhan R., "Influence of silane functionalized heat treated biosilica on mechanical, wear, and dynamic load–bearing properties of nettle fibre–reinforced vinyl ester composites", Biomass Conversion and Biorefinery, 2024, DOI: 10.1007/s13399-024-06243-42024
64Vimal A., Nicholas J.S., Kumar R.K.J., Sundar A.S., Pranesh B.R., "A review on unmanned aerial vehicle used for 360° surveillance", AIP Conference Proceedings, 322112024, DOI: 10.1063/5.02358892024
65Gokul S., Ramakrishnan T., Manickaraj K., Devadharshan P., Mathew M.K., Prabhu T.V., "Analyzing challenges and prospects for sustainable development with green energy: A comprehensive review", AIP Conference Proceedings, 322112024, DOI: 10.1063/5.02358842024
66Sathish K., Manickaraj K., Vanchimuthu C., Thiyagarajan V., Bavadharani C., "Investigating the effects of draft tube and its properties on Francis turbine performance - A critical review", AIP Conference Proceedings, 322112024, DOI: 10.1063/5.02359172024
67Naveenprabhu V., Veeramanikandan K., Poorani B.S., Gokulamadhavan K., Suba K., "A critical overview on corrosion characteristics of copper fin", AIP Conference Proceedings, 322112024, DOI: 10.1063/5.02358412024
68Sathish K., Nithyanandhan T., Vanchimuthu C., Thiyagarajan V., Bavadharani C., "An overview of the design and characteristics of Kaplan turbines", AIP Conference Proceedings, 322112024, DOI: 10.1063/5.02359162024
69Kumar R.S., Asha F.G., Aashika J., Madheswaran C., Shamanth S., "3D printing processes, materials and applications - A review", AIP Conference Proceedings, 322112024, DOI: 10.1063/5.02358932024
70Ramakrishnan T., Manickaraj K., Prithiv S.P., Aditya S.L.L., Rajanarayanan N., Gopalsamy S., "Advancements in aluminum metal matrix composites: Reinforcement, manufacturing, and applications", AIP Conference Proceedings, 322112024, DOI: 10.1063/5.02358812024
71Sakravarthy N.V., Tanikaiselvan G., Surendhar N., Varshan A.B., "Fuel shield pro: A toolkit for bike safety and fuel theft deterrence using polyethylene", AIP Conference Proceedings, 322112024, DOI: 10.1063/5.02359322024
72Venkatesh S., Harishravan B., Senthamaraiselvi B.L., Sojin S., Arulkumar E., "A substantiate study on 316LSS - Review on its properties", AIP Conference Proceedings, 322112024, DOI: 10.1063/5.02358792024
73Balasubramani S., Gokul S., Ramakrishnan T., Nitin P., Prithivraj K., Arjun R.N., "Prediction of defects in casting surface using image processing techniques", AIP Conference Proceedings, 322112024, DOI: 10.1063/5.02361722024
74Gokilakrishnan G., Parthasarathi R., Dhanya R., Sathguru R., "Review of metal additives in enhancing the mechanical properties of composite materials", AIP Conference Proceedings, 322112024, DOI: 10.1063/5.02358802024
75Gowtham S., Balaji K.S.R., Subisri S.K., Santhosh T., "Investigation of drilling and delamination on agave americana leaf fiber composite", AIP Conference Proceedings, 322112024, DOI: 10.1063/5.02360722024
76Pal P., Soni A., Kumar S.B., Singh B.K., Mishra A.K., Singh P., "Investigate the effect of process parameters for weld bead during arc welding process", AIP Conference Proceedings, 322112024, DOI: 10.1063/5.02359922024
77Sahu M.K., Biswal R.K., Kumar A., Ansu A.K., Kumar M., Kumar M., Thakur R.M., "Waste heat recovery in reheating furnace to improve the furnace efficiency with veneering cement and zirconia coating material", AIP Conference Proceedings, 322112024, DOI: 10.1063/5.02359952024
78Naveenprabhu V., Gayathri I., Madanprasad S., Dineshkumar L., Naveen S., Arulkumar E., "A critical review on the aluminium metal matrix composites on high thermal applications", AIP Conference Proceedings, 322112024, DOI: 10.1063/5.02358382024
79Sakravarthy N.V., Sudeep V., Vinith K., Dusendiran S., "Development of high strength and durable automobile dashboard by the dispersion of jute fibre into polyester resin reinforced with eggshell filler", AIP Conference Proceedings, 322112024, DOI: 10.1063/5.02359312024
80Harini S., Kanishk R., Deepatharan K.S., Singh B.K., Arulkumar E., "Effect of temperature on physical properties of PLA materials casted through additive manufacturing - A prolix review", AIP Conference Proceedings, 322112024, DOI: 10.1063/5.02358472024
81Jothish A.T., Maniraj J., Sahayaraj A.F., Selvan M.T., Kumar S.G., "Recent developments in functional polymer composites for biomedical applications", AIP Conference Proceedings, 322112024, DOI: 10.1063/5.02359032024
82Sathish K., Nithyanandhan T., Ravishankar P., Rohith S., Malathi L.K., "Material characteristics and its performance measures in turbine: A review", AIP Conference Proceedings, 322112024, DOI: 10.1063/5.02359122024
83Pushpanathan G., Karthikeyan L.P., Kumar K.M., Karuppusam R., "Enhance the safety of passengers in public transport by using the IOT & machine learning techniques", AIP Conference Proceedings, 322112024, DOI: 10.1063/5.02367552024
84Naveenprabhu V., Varsha A.R., Padma R.S., Tamilarasan J., "Optimizing material selection for high-temperature sensible energy storage", AIP Conference Proceedings, 322112024, DOI: 10.1063/5.02358432024
85Ganeshan P., Kathryn J.B., Kumar S.N., Siddharth S., "Studies on the characterization of natural fiber for their potential use for bio-degradable materials", AIP Conference Proceedings, 322112024, DOI: 10.1063/5.02367652024
86Raj R.A., Pragadeesh A., Arun S.M., Naveenprabhu V., "A review on thermal characteristics of natural fibre", AIP Conference Proceedings, 322112024, DOI: 10.1063/5.02359082024
87Kumar A., Harikrishnan K., Fathimashahiba Z., Arjunan M., Kumar M., Avinasilingam M., "Exploring the thermophysical characteristics of nanofluids containing nanoparticles and its possible outcomes", AIP Conference Proceedings, 322112024, DOI: 10.1063/5.02359852024
88Kumar R.S., Kumar T.P., Daniel S., Gugapriyan R., Shamanth S., "A review on sustainable manufacturing through green techniques", AIP Conference Proceedings, 322112024, DOI: 10.1063/5.02358922024
89Venkatesh S., Elanchezhiyan E., Elavarasan S., Gowtham T., Prakash G.J., Gopalsamy S., "Review on Mg alloys physical properties and machining properties", AIP Conference Proceedings, 322112024, DOI: 10.1063/5.02358782024
90Naveenprabhu V., Raj T.P., Mahalakshmi V., Naveen R., "Exploring material choices for additive manufacturing method in high-temperature applications: A comparative analysis", AIP Conference Proceedings, 322112024, DOI: 10.1063/5.02358422024
91Vimal A., Prabhanj S.R., Edison Thangaraj J., Navin R., Mathan S., Gopalsamy S., "A review on cooling of electronic components using piezoelectric cooler and nanofluid", AIP Conference Proceedings, 322112024, DOI: 10.1063/5.02358882024
92Srivastava A.K., Pal P., Pal A., Singh B.K., Kumar R., Kumar A., "Parametric evaluation & optimization of wire-EDM process for machining of super alloy materials (EN-24 steel) in terms of surface integrity and material removal rate", AIP Conference Proceedings, 322112024, DOI: 10.1063/5.02358442024
93Venkatesh S., Kathiravan A.A., Kavipriyan M., Nandhini S.S.G., Avinasilingam M., "A review on aluminium 7075 alloy: Micro structure, mechanical properties and application", AIP Conference Proceedings, 322112024, DOI: 10.1063/5.02358742024
94Kannan M., Manohar L., Agasto A.H., Mugeshkannan B., Sahayaraj A.F., Selvan M.T., Kumar S.G., "Review on bio-inspired approaches in polymer composites: Mimicking nature for enhanced performance", AIP Conference Proceedings, 322112024, DOI: 10.1063/5.02359062024
95Ganeshan P., Karthik C.S.R., Suganth B., Gokulakannan P., Kavin P., "Development of an automated sugarcane peeler", AIP Conference Proceedings, 322112024, DOI: 10.1063/5.02367572024
96Kumar A., Kumar M., Kumar A., Kumar A., Kumar S.B., Thakur R.M., Ansu A.K., "Dynamic study of a laminated curved beam made of bimodular composite material with equivalent stiffness method", AIP Conference Proceedings, 322112024, DOI: 10.1063/5.02359872024
97Sathish K., Manickaraj K., Krishna S.A., Basha K.M., Pravin R., "Integrating sustainable materials in exoskeleton development: A review", AIP Conference Proceedings, 322112024, DOI: 10.1063/5.02359132024
98Dhamotharan S., Pradeep K., Prasanth K.S., Kaviyarasu M., Gokul M., Sahayaraj A.F., Selvan M.T., Kumar S.G., "Progress in self-healing polymer composites: Materials design, mechanisms, and applications", AIP Conference Proceedings, 322112024, DOI: 10.1063/5.02359052024
99Pandya M., Kumar A., Ansu A.K., Kumar A., Kumar A., Kumar S.B., Thakur R.M., Rawani A., "Procedures, component optimization, and integration in the analysis of thermal energy storage materials", AIP Conference Proceedings, 322112024, DOI: 10.1063/5.02359862024
100Suresh Kumar R., Vishwadeep V., Viswarathan V., Adhilingavignesh K., Shamanth S., "A review on sol-gel method and coating of hybrid nano-composite", AIP Conference Proceedings, 322112024, DOI: 10.1063/5.02358912024
101Ramakrishnan T., Shameer M.S., Prasath A.M., Hemnath R., Rathinam S.C., Avinasilingam M., "Automatic plant irrigation system", AIP Conference Proceedings, 322112024, DOI: 10.1063/5.02358852024
102Millerjothi N.K., Adhithan S.K., Khogulanand V.R., Kiruba P., "Enhanced sorbent materials for post-combustion CO2capture - A prolix review", AIP Conference Proceedings, 322112024, DOI: 10.1063/5.02359252024
103Delcy V.R., Umadevi V., Yogeswari B., Banu A.S., Deivanayaki S., "Structural and spectral insights of doped and undoped L-alanine crystals", AIP Conference Proceedings, 322112024, DOI: 10.1063/5.02359202024
104Singh A.; Sinha S.; Verma S.B.; Singh B.K., "Benefits and Challenges of Decentralization in Education for Resource Optimization and Improved Performance", Decentralized Systems and Distributed Computing, 2024, DOI: 10.1002/9781394205127.ch82024
105Kumar R.S.; Yuvaperiyasamy M.; Sathish R.; Miniappan P.K.; Premkumar R.; Arivalagan P., "Impact Loading on Polymer Nanocomposites-A Comprehensive Review", Journal of Environmental Nanotechnology, 1332024, DOI: 10.13074/jent.2024.09.2438212024
106Vivek R.; Lalith Surya B.; Kishore A.T.; Jai Akash S.; Saikumar A., ""effortless Hydration: Exploring Automatic Water Dispensers"", Journal of Physics: Conference Series, 283712024, DOI: 10.1088/1742-6596/2837/1/0120062024
107Karthik Reddy G.; Singh P.; Ravi K.C.; Anusha B.; Gowri C.; Vivek R., "Modeling and Analysis of MEMS Electrostatic Energy Harvesting System", Journal of Physics: Conference Series, 283712024, DOI: 10.1088/1742-6596/2837/1/0121042024
108Vivek R.; Venkatesh S.; Satyanarayana Gupta M.; Kavin Kumaar S.S.; Sivashri J.T.; Aswin G.; Jagadheep A., "Particle disseverment study in square-cylinder vortex separator by Centrifugal action in CFD", Journal of Physics: Conference Series, 283712024, DOI: 10.1088/1742-6596/2837/1/0120272024
109Vivek R.; Ganeshkumar S.; Dharanikumar S.; Rameshbabu R.; Balasubramani S.; Vivek Anand A., "Impact on pitting corrosion in Martensitic Stainless Steel: The Effect of Annealing Response", Journal of Physics: Conference Series, 283712024, DOI: 10.1088/1742-6596/2837/1/0120072024
110Naveenprabhu V.; Veeramanikandan K.; Ragu S.; Hariharan S.; Sravanthi G., "Study on Enhanced Transfer Characteristic in Heat Exchanger Tubes with Low Fins", Journal of Physics: Conference Series, 283712024, DOI: 10.1088/1742-6596/2837/1/0120582024
111Venkatesh S., Kathirvel M., Dharsan R.V., Yogaraju K., Sachuthananthan B., "Review on Flow Pattern Characters in Cyclone Separator", 10th International Conference on Advanced Computing and Communication Systems, ICACCS 2024, 2024, DOI: 10.1109/ICACCS60874.2024.107172542024
112Nithyanandhan T., Manickaraj K., Sathish K., Ramachandran N., Sachuthananthan B., "Effects of Palm Stalk Ash on Mechanical Properties of Al6061 Reinforced with Graphite by Using Stir Casting Process", 10th International Conference on Advanced Computing and Communication Systems, ICACCS 2024, 2024, DOI: 10.1109/ICACCS60874.2024.107172712024
113Suhan M., Shanmugam C., Vimal A., Vijay Ram G., Janani B., Amarnath A.S., "A Review on Power Generation Using Vertical Windmill", 10th International Conference on Advanced Computing and Communication Systems, ICACCS 2024, 2024, DOI: 10.1109/ICACCS60874.2024.107172182024
114Manickaraj K., Nithyanandhan T., Sathish K., Karuppasamy R., Sachuthananthan B., "An Experimental Investigation of Volume Fraction of Natural Java Jute and Sponge Gourd Fiber Reinforced Polymer Matrix Composite", 10th International Conference on Advanced Computing and Communication Systems, ICACCS 2024, 2024, DOI: 10.1109/ICACCS60874.2024.107172212024
115Aravinth K., Rajesh Kumar D., Ramakrishnan T., Veeramanikandan K., Navin M., Kavi Rasu K., "Prediction of Magnetic Properties in MR Damper Using FEA", 10th International Conference on Advanced Computing and Communication Systems, ICACCS 2024, 2024, DOI: 10.1109/ICACCS60874.2024.107169572024
116Priyanka G., Nivaashini M., Shree Akshaya B., Subashini M., Ritish G., "An Efficient Image to Speech Generation System for Visually Impaired Individuals Using Deep Learning Techniques", 10th International Conference on Advanced Computing and Communication Systems, ICACCS 2024, 2024, DOI: 10.1109/ICACCS60874.2024.107173152024
117Venkatesh S., Elavarasan S., Elanchezhiyan E., Suganth B., Sachuthananthan B., "Performance of Dry Powder Inhaler - Review", 10th International Conference on Advanced Computing and Communication Systems, ICACCS 2024, 2024, DOI: 10.1109/ICACCS60874.2024.107172142024
118Sachuthananthan B., Padmaja N., Shaik F., Kumar P.S., Vyas M.G., Jothi N.K.M., "Electric Vehicle Technology Opportunities and Challenges", 10th International Conference on Advanced Computing and Communication Systems, ICACCS 2024, 2024, DOI: 10.1109/ICACCS60874.2024.107172132024
119Saravanan G., Aadithan U., Jaiyesh B., Kaviyarasu E., Kumaresan D., "Design of Hydro Electric Power Generator for Domestic Pipeline", 10th International Conference on Advanced Computing and Communication Systems, ICACCS 2024, 2024, DOI: 10.1109/ICACCS60874.2024.107170062024
120Rajamani P., Selvaraj V., Velusamy M., Karuppusamy M., Thirumalaisamy R., Radhakrishnan K., "Effect of packing factor on energy performance of solar PV/T water-heating collector system - An experimental study", AIP Conference Proceedings, 3231,1,2024, DOI: 10.1063/5.02358492024
121Vimal A., Preethi R., Prasanth D.M., Prasath J., "Review of piezo-electric sensor-based power generation by footsteps", AIP Conference Proceedings, 3231,1,2024, DOI: 10.1063/5.02358872024
122Sathish K.T., Maniraj J., Thangarasu V.S., Sahayaraj A.F., GaneshKumar S., "Strain-controlled thermomechanical fatigue testing of EN-GJL-250 for automotive brake disc application", Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 2024, DOI: 10.1177/095440702412954122024
123Dhamudia K., Mahato S.K., Singh R.K., Kumar A., Panda S.K., Sahu M.K., Hasnain S.M.M., Zairov R., "Heat propagation phenomenon of compressed natural gas /air premixed laminar flame impinging on a flat surface", Case Studies in Thermal Engineering, 642024, DOI: 10.1016/j.csite.2024.1055712024
124Kumar S.G., Rizwan R.M., Kumar V.N., Revathi B., Rahul S.M., Suyambulinagm I., Arockiasamy F.S., "A Review on Advancements in Polymer Composites for 3D Printing: Materials, Processes, and Applications", Springer Proceedings in Materials, 602024, DOI: 10.1007/978-981-97-7071-7_432024
125Ganeshkumar S., Rahman H.A., Gowtham T.M., Adithya T., Suyambulinagm I., Maniraj J., "Multifunctional Polymer Composites: Design, Properties, and Emerging Applications—A Critical Review", Springer Proceedings in Materials, 602024, DOI: 10.1007/978-981-97-7071-7_452024
126Ganeshkumar S., Kumar S.B., Kumar K.M., Hariharan D., Suyambulinagm I., Arockiasamy F.S., "Mechanical Performance and Sustainability of Polymer Composites—A Critical Review", Springer Proceedings in Materials, 602024, DOI: 10.1007/978-981-97-7071-7_442024
S. No.PublicationsYear
1Gowtham S., Barath G., Sudharsan K., Thiyagarajan V., Balasubramani S., "Regenerative Suspension System Using Linear Magnet System",AIP Conference Proceedings,2914, (1),2023,DOI:10.1063/5.01758512023
2Venkatesh S., Kathirvel M., Dharsan R.V., Yogaraju K., Balasubramani S., "Studies on Particle Separation Equipment – A Review",AIP Conference Proceedings,2914, (1),2023,DOI:10.1063/5.01758292023
3Ganeshkumar S., Gokilakrishnan G., Dharanidharan M., Manoj S., Gautam K., "Characterization of Multilayer Coated Cutting Tools in Different Machining Processes – A Review",AIP Conference Proceedings,2914, (1),2023,DOI:10.1063/5.01767782023
4Sathish K., Sabareswaran K., Balakumar B.S., Bharathram B., Balasubramani S., "Performance Study on Draft Tube in Kaplan Turbine",AIP Conference Proceedings,2914, (1),2023,DOI:10.1063/5.01758322023
5Gowtham S., Dharanidharan M., Manoj S., Balakumar B.S., Bharathram B., "A Survey on Design and Optimization of Metallic Biomaterial for Orthopaedic Application",AIP Conference Proceedings,2914, (1),2023,DOI:10.1063/5.01758522023
6Naveenprabhu V., Gowtham K.D., Prabu P.L.M., Vigneshwar R., "A review on CFD analysis of Evaporative cooling in condenser",AIP Conference Proceedings,2914, (1),2023,DOI:10.1063/5.01758332023
7Ramakrishnan T., Aravinth K., Singh A., Raja S.D., Prasad C.G., Balasubramani S., "Survey on Natural Fibre Composite: Manufacturing Techniques, Mechanical Behaviour and Various Chemical Treatments",AIP Conference Proceedings,2914, (1),2023,DOI:10.1063/5.01760452023
8Kumar R.S., Vignesh K.A., Gokulprasanth S., Ambalanathan A.T., Balasubramani S., "Machinability Studies on Aluminium and its Alloys - A Literature Review",AIP Conference Proceedings,2914, (1),2023,DOI:10.1063/5.01761012023
9Maheswari K.U., Thilak M., SenthilKumar N., Nagaprasad N., Jule L.T., Seenivasan V., Ramaswamy K., "Regression analysis on forward modeling of diffuse optical tomography system for carcinoma cell detection",Scientific Reports,13, (1),2023,DOI:10.1038/s41598-023-29063-42023
10Antony Vigil M.S., Agarwal A., Rao K.B.V.B., Meena Devi G., Farooq M.U., Ganeshan P., Alyami N.M., Almeer R., Raghavan S.S., "A combined neural network mechanism for categorizing the normal and cancer cells",Journal of Intelligent and Fuzzy Systems,45, (5),2023,DOI:10.3233/JIFS-2341882023
11Raman R., Barve A., Meenakshi R., Jayaseelan G.M., Ganeshan P., Taqui S.N., Almoallim H.S., Alharbi S.A., Raghavan S.S., "Classifying the bacterial taxonomy with its metagenomic data using the deep neural network model",Journal of Intelligent and Fuzzy Systems,45, (5),2023,DOI:10.3233/JIFS-2318972023
12Aravinth K., Ramakrishnan T., "Study on properties of new biodegradable plant fiber (agave decipiens) for polymer reinforcement",Global Nest Journal,25, (9),2023,DOI:10.30955/gnj.0052192023
13Harshavardhan A., Cheerla S., Parkavi A., Latha Mary S.A., Qureshi K., Mhaske H.R., "Deep learning modified neural networks with chicken swarm optimization-based lungs disease detection and severity classification",Journal of Electronic Imaging,32, (6),2023,DOI:10.1117/1.JEI.32.6.0626032023
14Kirubagharan R., Dhanabalan S., Karthikeyan T., "Effect of optimized alkali-silane treatment on mechanical and fatigue behavior of maize husk fiber epoxy composites: a strength factor approach",Biomass Conversion and Biorefinery,13, (17),2023,DOI:10.1007/s13399-022-03661-02023
15Radjarejesri S., Mani M., Sharma A., Arunkumar M., Singh B.K., Kannan S., Eldesoky G.E., Wabaidur S.M., Aftab S., "Environmental and chemical changes in palm oil biodiesel using homogeneous catalysts",Global Nest Journal,25, (8),2023,DOI:10.30955/gnj.0049842023
16Ganeshan P., Sravani Y., Raja K., Singh B.K., "Comparative study between CeO2 reinforced Zirconia Toughened Alumina (ZTA) and ZTA in terms of functional and mechanical properties",Journal of Ceramic Processing Research,24, (5),2023,DOI:10.36410/jcpr.2023.24.5.7812023
17Arunkumar M., Mani M., Rai A.K., Adinarayanan A., Subbiah R., Ganeshan P., Kannan S., Seikh A.H., Iqbal A., "Extraction, performance and emission characterization of diesel engine using waste lipolytic microorganism biodiesel",Global Nest Journal,25, (7),2023,DOI:10.30955/gnj.0049812023
18Ganeshkumar S., Kumar A., Maniraj J., Suresh Babu Y., Ansu A.K., Goyal A., Kareem Kadhim I., Saxena K.K., Prakash C., Altuijri R., Ijaz Khan M., Hassan A.M., "Exploring the potential of nano technology: A assessment of nano-scale multi-layered-composite coatings for cutting tool performance",Arabian Journal of Chemistry,16, (10),2023,DOI:10.1016/j.arabjc.2023.1051732023
19Prajapati P.K., Biswas P., Singh B.K., Bapanapalle C.O., Ghosh R., Mandal N., "Reinforcing potential of MWCNTs on mechanical and machining performance of hot-pressed ZTA-MgO ceramic cutting inserts",Diamond and Related Materials,138,2023,DOI:10.1016/j.diamond.2023.1102022023
20Naveenprabhu V., Suresh M., "Performance studies on a water chiller equipped with natural fiber cooling pad based evaporative condenser",Industrial Crops and Products,201,2023,DOI:10.1016/j.indcrop.2023.1169232023
21Kumar A., Kumar D., Choudhury R., Ansu A., Goyal A., Oza A.D., Patel A., Joshi A., Kumar D., "Application of 3D printing for engineering and bio-medicals: recent trends and development",International Journal on Interactive Design and Manufacturing,17, (5),2023,DOI:10.1007/s12008-022-01145-z2023
22Das A.K., Singh R.K., Roy M., Kumar A., Rana S.C., Ansu A., Goyal A., Oza A.D., Kumar M., Gehlot A., "Optimum design of S-shaped diffuser by studying the effect of inlet velocity, turning angle and area ratio",International Journal on Interactive Design and Manufacturing,17, (5),2023,DOI:10.1007/s12008-022-01132-42023
23Kumar R.R., Singh A., Kumar A., Ansu A., Kumar A., Kumar S., Kumar D., Goyal A., Oza A.D., Singh D., "Enhancement of friction stir welding characteristics of alloy AA6061 by design of experiment methodology",International Journal on Interactive Design and Manufacturing,17, (5),2023,DOI:10.1007/s12008-022-01106-62023
24Sharma A., Raj D.K., Kumar D., Kumar A., Kumar A., Sahu M.K., "Design and Development of Novel Solar Concentrating Spittoon to Control the Spread of COVID-19 Virus at Public Places",Evergreen,10, (3),2023,DOI:10.5109/71516922023
25Srivastava A.K., Singh B.K., Gupta S., "Prediction of Tool Wear Using Machine Learning Approaches for Machining on Lathe Machine",Evergreen,10, (3),2023,DOI:10.5109/71516832023
26Venkateswaran N., Subbaiyan N., Punniyakotti Varadharajan G., Vellingiri S., Asary A.R., Giri J.M., Petchimuthu P., "A comprehensive review of the energy efficiency on nano coated fin and tube condenser",Environmental Quality Management,33, (1),2023,DOI:10.1002/tqem.220552023
27Gokilakrishnan G., Singh B.K., Vigneshkumar M., "Comparative study among Al2O3, ZTA, MgO/ZTA & CuO/ZTA composites in terms of Mechanical Properties",Journal of Ceramic Processing Research,24, (4),2023,DOI:10.36410/jcpr.2023.24.4.6552023
28Sailaja C., Thilagham K.T., Anand K.T., Ganeshan P., Kannan S., Seikh A.H., Ghosh A., "Study of microstructural and mechanical properties of Aluminium LM14 hybridized with reinforcement of Nanoparticles of Titanium Diboride and Alumina",Journal of Ceramic Processing Research,24, (4),2023,DOI:10.36410/jcpr.2023.24.4.6172023
29Somasundaram B., Anand K.T., Kirubakaran D., Ganeshan P., Kannan S., Seikh A.H., Ghosh A., "Experimental analysis of AA7475/ZrC/Al2O3 hybrid composites by taguchi method",Journal of Ceramic Processing Research,24, (4),2023,DOI:10.36410/jcpr.2023.24.4.6262023
30Gokilakrishnan G., Meenakshi R., Pradeep G.M., Kamalakannan R., Manivelmuralidaran V., "Implementation of lean six sigma (LSS) techniques for tyre manufacturing in small and medium-sized enterprises",International Journal of System Assurance Engineering and Management,14, (4),2023,DOI:10.1007/s13198-023-01917-02023
31Vinith B., Dharshan S.A.D., Aravind S., Singh B.K., "Friction stir welding evolution, hybrid technologies and shoulder shape",International Journal on Interactive Design and Manufacturing,17, (4),2023,DOI:10.1007/s12008-023-01208-92023
32Vimal A., Thalaieswaran S., Kannan N.H., Ganeshan P., Venkatesh S., "A review on the Investigation of Hydrocyclone Performance by shape optimization",E3S Web of Conferences,405,2023,DOI:10.1051/e3sconf/2023405040472023
33Ganeshkumar S., Maniraj J., Gokul S., Ramaswamy K., "Biologically inspired snn for robot control",Neuromorphic Computing Systems for Industry 4.0,2023,DOI:10.4018/978-1-6684-6596-7.ch0112023
34Ganeshan P., Theja M.S.R., Ramshankar P., Raja K., "Halloysite Nanotubes (HNTs)-Reinforced Natural Rubber (NR)/Ethylene-Propylene-Diene Monomer (EPDM) Composites",Polymer (Korea),47, (4),2023,DOI:10.7317/pk.2023.47.4.4042023
35Balaji S., Kumar S.D., Magarajan U., RameshBabu S., Ganeshkumar S., Sharma S., Abdelmohsen S.A.M., Saha I., Eldin S.M., "Comparative analysis of experimental and numerical investigation on multiple projectile impact of AA5083 friction stir welded targets",PLoS ONE,18, (45480),2023,DOI:10.1371/journal.pone.02852542023
36Sharma A., Kumar D., Kumar A., Faisal N., Kumar N., Pandey S., Hasnain S.M.M., Al-Hazani T.M., AlKahtane A.A., Alkahtani S., Chatterjee R., "Designing, Modeling, and Fabrication of a Novel Solar-Concentrating Spittoon against COVID-19 for Antibacterial Sustainable Atmosphere",Sustainability (Switzerland),15, (12),2023,DOI:10.3390/su151292862023
37Raja K., Ganeshan P., Singh B.K., Upadhyay R.K., Ramshankar P., Mohanavel V., "Effect of mol.% of Yttria in Zirconia matrix alongside a comparative study among YSZ, alumina & ZTA ceramics in terms of mechanical and functional properties",Sadhana - Academy Proceedings in Engineering Sciences,48, (2),2023,DOI:10.1007/s12046-023-02136-w2023
38Kumar A., Layek A., "Effect of heat transfer and pressure drop characteristics on the performance analysis of an artificially roughened solar air heater",Heat and Mass Transfer/Waerme- und Stoffuebertragung,59, (5),2023,DOI:10.1007/s00231-022-03296-x2023
39Mazumder S., Ghosh K., Singh B.K., Chakraborty S.S., Mandal N., "Experimental and Finite Element Analyses for High-Speed Machining of AISI 4340 steel with ZTA Insert",Journal of The Institution of Engineers (India): Series C,104, (2),2023,DOI:10.1007/s40032-023-00917-02023
40Gopal G., Murugesan V., "Comparative assessment over the selection of lean supply chain practices through fuzzy integrated principal component analysis, gray relational analysis, and complex proportional assessment approaches",Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering,237, (2),2023,DOI:10.1177/095440892211035052023
41Kumar D., Kumar A., Kumar N., Sharma A., Choudhury R., Faisal N., Singh R.K., Mane B.K., "Current trends, regulations, challenges, and management strategies of e-waste in India",Sustainable Approaches and Strategies for E-Waste Management and Utilization,2023,DOI:10.4018/978-1-6684-7573-7.ch0012023
42Ramshankar P., Sashikkumar M., Ganeshan P., Raja K., "Experimental investigation of hybrid composites using biowastes and Calotropis gigantea: an eco-friendly approach",Global Nest Journal,25, (4),2023,DOI:10.30955/gnj.0046202023
43Singh P., Ansu A.K., Sharma R.K., Kumari P., Kumar A., Kumar R., "Development, Thermal Properties, and Reliability Testing of Eutectic Polyethylene Glycol as Phase Change Materials for Thermal Energy Storage Applications",International Journal of Thermophysics,44, (3),2023,DOI:10.1007/s10765-022-03146-22023
44Sureshbabu Y., Ganeshan P., Raja K., Vivek S., "Performance and emissions parameters optimization of thermal barrier coated engine tested with Tamanu blended diesel fuel: a novel emission pollution-preventive approach",Global Nest Journal,25, (3),2023,DOI:10.30955/gnj.0045942023
45Satyam, Gireesh N., Damodaram D., Venkataramanan C., "Design and Performance Enhancement of DGS Based Planar Antenna for UWB Wireless Communication",IEEE 1st International Conference on Ambient Intelligence, Knowledge Informatics and Industrial Electronics, AIKIIE 2023,2023,DOI:10.1109/AIKIIE60097.2023.103901702023
46Gangwar H., Parambil Gangadharan S.M., Daniel L., Srinivasa Kumar B., Hariramakrishnan P., Ramkumar G., Arunkumar M., Ganeshan P., Ifseisi A.A., "Micro-Grid Renewable Energy Integration and Operational Optimization for Smart Grid Applications Using a Deep Learning",Electric Power Components and Systems,2023,DOI:10.1080/15325008.2023.22969602023
47Balaji V., Karthik T.S., Akiladevi N., Sathya S., Mahalakshmi V., Kumar A., "NeuroAI-Driven Advanced Deep Brain Stimulation for Precision Management of Movement Disorders",2nd International Conference on Automation, Computing and Renewable Systems, ICACRS 2023 - Proceedings,2023,DOI:10.1109/ICACRS58579.2023.104049662023
48Choubey O.N., Shukla V.K., Chauhan A.P.S., Singh B.K., "Cryogenic treatment on M2 HSS tool and its performance",International Journal of Materials Engineering Innovation,14, (4),2023,DOI:10.1504/IJMATEI.2023.1361182023
49Suthar T., Shah T., Raja M.K., Raha S., Kumar A., Ponnusamy M., "Predicting Weather Forecast Uncertainty based on Large Ensemble of Deep Learning Approach",International Conference on Self Sustainable Artificial Intelligence Systems, ICSSAS 2023 - Proceedings,2023,DOI:10.1109/ICSSAS57918.2023.103318792023
50Subbarao E., Gite P., Sharma A., Vyakaranam L., Sardar T.H., Taqui S.N., Ganeshan P., Metwally A.S.M., Kalam M.A., "Investigation of Solar Energy for Urban Areas and Metropolitan Communities Using Machine Learning",Electric Power Components and Systems,2023,DOI:10.1080/15325008.2023.22939482023
51Dutta C., Nagarajan N., Adhoni Z.A., Dhandapany S.K., Alagarsamy A., Chakravarthy A.K., Praveen N., Pushpanathan G., Kannan S., "Outlier detection in additive manufacturing using novel machine learning algorithm",International Journal of Advanced Manufacturing Technology,2023,DOI:10.1007/s00170-023-12798-92023
52Ponnusamy P., Girisha L., Balamurugan S., Benham A., Vivek R., Loganathan G.B., Girimurugan R., "Investigation on the thermal properties of carbon fibres with silica-based aerogel composites",Journal of Physics: Conference Series,2603, (1),2023,DOI:10.1088/1742-6596/2603/1/0120382023
53Prasanna K.M., Francis S.V., Kumara V., Sagai Francis Britto A., Nageswara Rao G., Ara T., Ganeshan P., Ifseisi A.A., Aftab S., "Smart Deep Learning Model to Recognize PCM Optimization Performance on Solar Cooling System",Electric Power Components and Systems,2023,DOI:10.1080/15325008.2023.22816302023
54Sharanya C., Brahma Rao K.B.V., Rohith Bhat C., Veerraju M.S., Thirupathi V., Taqui S.N., Ganeshan P., Ouladsmane M., Kalam M.A., "Solar Powered IoT Sensors to Increase the Network Longevity",Electric Power Components and Systems,2023,DOI:10.1080/15325008.2023.22768272023
55Singh P.K., Kumar S.S., Lakshmana Kumar S., Kulandaivel A., Geerthik S., Ganeshan P., Sathish Kannan S., Seikh A.H., Iqbal A., "Impact of oxy-additives on diesel engine performance and emission parameters using waste cooking oil biodiesel",Global Nest Journal,25, (7),2023,DOI:10.30955/gnj.0049832023
56Selvaraj G., Yessian S., Ramalingam S., Dharani Kumar S., Gopal G., Sharma S., Kumar A., Li C., Abbas M., "Investigation on topology-optimized compressor piston by metal additive manufacturing technique: Analytical and numeric computational modeling using finite element analysis in ANSYS",Open Physics,21, (1),2023,DOI:10.1515/phys-2022-02592023
57Rajan K., Koti V., Venkatesh R., Dattu V.S.N.CH., Mohanavel V., Kannan S., Ganeshan P., Seikh H.A., Iqbal A., "Experimenting the various behavior of pumpkin seed oil methyl ester with varied injection pressure",Global Nest Journal,25, (7),2023,DOI:10.30955/gnj.0048152023
58Lal B., Vishnu Sakravarthy N., Kumar M.A., Chinthamu N., Pokhriyal S., "Development of Product Quality with Enhanced Productivity in Industry 4.0 with AI Driven Automation and Robotic Technology",Proceedings of the 2023 2nd International Conference on Augmented Intelligence and Sustainable Systems, ICAISS 2023,2023,DOI:10.1109/ICAISS58487.2023.102507362023
59Krishnamoorthy N., Nagabhooshanam N., Rao P.K.V., Verma R., Kumar D.S., Sankar G.A., Kumar B.K., Mohanavel V., "A characterization study on toughening natural fibre composites using functionalized barely husk biosilica",Biomass Conversion and Biorefinery,2023,DOI:10.1007/s13399-023-04873-82023
60Miniappan P.K., Marimuthu S., Kumar S.D., Gokilakrishnan G., Sharma S., Li C., Dwivedi S.P., Abbas M., "Mechanical, fracture-deformation, and tribology behavior of fillers-reinforced sisal fiber composites for lightweight automotive applications",Reviews on Advanced Materials Science,62, (1),2023,DOI:10.1515/rams-2023-03422023
61Joshua Gnana Sekaran J., Gokilakrishnan G., Pradeep G.M., Saravanan R., Girimurugan R., "Experimental Explorations on Mechanical Performance of Waste Marble Dust Powder and Banana Fibre Strengthened Hybrid Bio-composites",Lecture Notes in Mechanical Engineering,2023,DOI:10.1007/978-981-99-2921-4_852023
62Tamizharasan A., Ramanath Kini M.G., Suresh Kumar B., Manjunath R., Shafi S., Taqui S.N., Ganeshan P., Ouladsmane M., Aftab S., "Smart Performance Evolution of a Solar Water Heating System with PCM by Using Deep Learning Approach",Electric Power Components and Systems,51, (18),2023,DOI:10.1080/15325008.2023.22434582023
63Ranjith Kumar A., Nagabhooshanam N., Naresh Kumar M., Sendil Kumar D., Babu G.R., Chakravarthy A.K., Praveen N., Ganeshan P., Kannan S., "Energy optimization in additive manufacturing based on cluster-aware enhanced spider monkey optimization",International Journal of Advanced Manufacturing Technology,2023,DOI:10.1007/s00170-023-11846-82023
64Raja K., Sankareswaran N., Ganeshan P., Vivek S., "DYNAMIC BEHAVIOUR AND MICROSTRUCTURE EVOLUTION OF ZrO2 PARTICLE REINFORCED ALUMINIUM ALLOY CERAMICS MATRIX COMPOSITES",Journal of Environmental Protection and Ecology,24, (3),20232023
65Kirubashankar T.S., Dhanabalan S., Balasubramanian B., Ganeshan P., "MECHANICAL AND MORPHOLOGICAL BEHAVIOUR OF Holoptelea integrifolia FIBRE REINFORCED WITH SiC PARTICULATES HYBRID POLYMER EPOXY COMPOSITES",Journal of Environmental Protection and Ecology,24, (2),20232023
66Nagasundaram S., Bobinath B.N., Shedthi A., Rajalakshmi K., Humnekar T.D., Millerjothi, "Analysis of the Requirement and Artificial Intelligence-based Resource Management System in Cloud",2023 9th International Conference on Advanced Computing and Communication Systems, ICACCS 2023,2023,DOI:10.1109/ICACCS57279.2023.101129402023
67Naveenprabhu V., Hariharan S., Barath Kumar S., Ganesh Kumar S., Aadithan U., Janani B., "Controlling Gate Valves with Wi-Fi: An Overview of Available Technologies and Applications",2023 9th International Conference on Advanced Computing and Communication Systems, ICACCS 2023,2023,DOI:10.1109/ICACCS57279.2023.101126982023
68Gokilakrishnan G., Prabha D., Srinivasan S., Thirumurugaveerakumar S., Vigneshkumar M., Anandakumar H., "A Critical Analysis of the Block Chain in Manufacturing System Implementation",2023 9th International Conference on Advanced Computing and Communication Systems, ICACCS 2023,2023,DOI:10.1109/ICACCS57279.2023.101128282023
69Verma R., Singh B.K., "Role of Technology on the Management of Transportation",Energy, Environment, and Sustainability,2023,DOI:10.1007/978-981-99-1517-0_82023
70Dinesh Kumar D., Balamurugan A., Suresh K.C., Suresh Kumar R., Jayanthi N., Ramakrishnan T., Hasane Ahammad S.K., Mayakannan S., Venkatesa Prabhu S., "Study of Microstructure and Wear Resistance of AA5052/B4C Nanocomposites as a Function of Volume Fraction Reinforcement to Particle Size Ratio by ANN",Journal of Chemistry,2023,2023,DOI:10.1155/2023/25540982023
71Pradeep K.V., Gowrishankar K., Sivanantham E., Rao K.S., Kiran N., Vimal A., "Detection of Early Fault in Power Electronic Converters through Machine Learning and Data Mining Techniques",Proceedings of the 3rd International Conference on Artificial Intelligence and Smart Energy, ICAIS 2023,2023,DOI:10.1109/ICAIS56108.2023.100738202023
72Vivek R., Rameshbabu R., Tamilarasan V.D., Arunachalam P., Vivek Anand A., "A Comparative study on Annealing and phase transition effect in SS 304 and SSLNA from low Nickel Austenite to Martensite",Materials Today: Proceedings,2023,DOI:10.1016/j.matpr.2023.03.7502023
73Singh B.K., Ramji C., Ganeshan P., Mohanavel V., Balasundaram T., Kumar V.V., Balasubramanian B., Ramshankar P., Ramesh A., Thanappan S., "Performance Analysis of Solar Still by Using Octagonal-Pyramid Shape in the Solar Desalination Techniques",International Journal of Photoenergy,2023,2023,DOI:10.1155/2023/47051932023
74Muruganandhan P., Jothilakshmi S., Vivek R., Nanthakumar S., Sakthi S., Mayakannan S., Girimurugan R., "Investigation on silane modification and interfacial UV aging of flax fibre reinforced with polystyrene composite",Materials Today: Proceedings,2023,DOI:10.1016/j.matpr.2023.03.2722023
75Singh B.K., Chauhan N., Mishra A.K., yadhuvanshi A.A., Kumar A., Ansu A., Goyal A., "Experimental investigation of welding parameters to enhance the impact strength using gas tungsten arc welding",International Journal on Interactive Design and Manufacturing,2023,DOI:10.1007/s12008-023-01264-12023
76Prasanth I.S.N.V.R., Jeevanandam P., Selvaraju P., Sathish K., Hasane Ahammad S.K., Sujatha P., Kaarthik M., Mayakannan S., Sasikumar B., "Study of Friction and Wear Behavior of Graphene-Reinforced AA7075 Nanocomposites by Machine Learning",Journal of Nanomaterials,2023,2023,DOI:10.1155/2023/57237302023
77Mahesha C.R., Suprabha R., Suresh Kumar R., Chowdary C.M., Upadhyay V.V., Soumya M., Al-Ammar E.A., Palaniappan S., Diriba A., "Effect of ZrB2Particles on Machining Parameters of AA7475 Alloy-Based Composites by Optimization Technique",Advances in Materials Science and Engineering,2023,2023,DOI:10.1155/2023/85734402023
78Thirumalaisamy R., Senthil Kumar S., Chelladurai S.J.S., Gnanasekaran S., Sivananthan S., Geetha N.K., Ramesh A., Assefa G.B., "Study on Water Absorption Characteristics, Various Chemical Treatments, and Applications of Biological Fiber-Reinforced Polymer Matrix Composites",Journal of Nanomaterials,2023,2023,DOI:10.1155/2023/99031192023
79Singh B.K., "State-of-Art on Self-Lubricating Ceramics and Application of Cu/CuO as Solid Lubricant Material",Transactions of the Indian Ceramic Society,82, (1),2023,DOI:10.1080/0371750X.2022.21496252023
80Kalidas S., Rangasamy R., Seenivasan V., "Investigation on the 1-kW Francis turbine elbow type draft tube performance by numerical and optimisation approach",Progress in Computational Fluid Dynamics,23, (1),2023,DOI:10.1504/PCFD.2021.100480842023
81NagarajaGanesh B., Rekha B., Mohanavel V., Ganeshan P., "Exploring the Possibilities of Producing Pulp and Paper from Discarded Lignocellulosic Fibers",Journal of Natural Fibers,20, (1),2023,DOI:10.1080/15440478.2022.21376182023
82Naveenprabhu V., Suresh M., "Performance assessment of annular fins and cellulose cooling pad on heat transfer enhancement of evaporative heat exchangers using volumetric heat and mass transfer coefficients",Numerical Heat Transfer; Part A: Applications,83, (5),2023,DOI:10.1080/10407782.2022.21018022023
S. No.PublicationsYear
1Alemu D., Kitila C., Garedew W., Jule L.T., Badassa B., Nagaprasad N., Seenivasan V., Saka A., Ramaswamy K., "Growth, yield, and yield variables of onion (Allium Cepa L.) varieties as influenced by plantspacing at DambiDollo, Western Ethiopia",Scientific Reports,12, (1),2022,DOI:10.1038/s41598-022-24993-x2022
2Saka A., Shifera Y., Jule L.T., Badassa B., Nagaprasad N., Shanmugam R., Priyanka Dwarampudi L., Seenivasan V., Ramaswamy K., "Biosynthesis of TiO2 nanoparticles by Caricaceae (Papaya) shell extracts for antifungal application",Scientific Reports,12, (1),2022,DOI:10.1038/s41598-022-19440-w2022
3Baskaran A., Manikandan N., Jule L.T., Nagaprasad N., Saka A., Badassa B., Ramaswamy K., Seenivasan V., "Influence of capillary tube length on the performance of domestic refrigerator with eco-friendly refrigerant R152a",Scientific Reports,12, (1),2022,DOI:10.1038/s41598-022-18606-w2022
4Saka A., Gudata L., Jule L.T., Seeivasan V., Nagaprasad N., Ramaswamy K., "Synthesis of nano-sized lead sulfide thin films from Avocado (Glycosmis cochinchinensis) Leaf extracts to empower pollution remediation",Scientific Reports,12, (1),2022,DOI:10.1038/s41598-022-15785-42022
5Saka A., Jule L.T., Soressa S., Gudata L., Nagaprasad N., Seenivasan V., Ramaswamy K., "Biological approach synthesis and characterization of iron sulfide (FeS) thin films from banana peel extract for contamination of environmental remediation",Scientific Reports,12, (1),2022,DOI:10.1038/s41598-022-14828-02022
6Ramaswamy K., Jule L.T., N N., Subramanian K., R S., L P.D., Seenivasan V., "Reduction of environmental chemicals, toxicity and particulate matter in wet scrubber device to achieve zero emissions",Scientific Reports,12, (1),2022,DOI:10.1038/s41598-022-13369-w2022
7Ganeshkumar S., Singh B.K., Kumar S.D., Gokulkumar S., Sharma S., Mausam K., Li C., Zhang Y., Tag Eldin E.M., "Study of Wear, Stress and Vibration Characteristics of Silicon Carbide Tool Inserts and Nano Multi-Layered Titanium Nitride-Coated Cutting Tool Inserts in Turning of SS304 Steels",Materials,15, (22),2022,DOI:10.3390/ma152279942022
8Vigneshkumar M., Murugan S.S., Varthanan P.A., Gokilakrishnan G., Gobikrishnan N., Pagutharivu A.P., "High velocity oxygen fuel coating for enhancing tribological behaviour of engineering metals",AIP Conference Proceedings,2527,2022,DOI:10.1063/5.01081332022
9Aravinth K., Ramakrishnan T., Sathish R., Balasubramani S., "Preparation and characterization of magneto rheological fluid for vibration damping",AIP Conference Proceedings,2527,2022,DOI:10.1063/5.01080912022
10Kumar R.S., Kumar S.D., Rajkumar S., "Multi-response optimization of AISI H11 using Taguchi and Grey relational analysis",Materials Research Express,9, (10),2022,DOI:10.1088/2053-1591/ac95fe2022
11Jaganathan A., Mathesan K., "Risk prediction model and classification of various hazards in automobile industry using HAO based deep CNN",Sadhana - Academy Proceedings in Engineering Sciences,47, (3),2022,DOI:10.1007/s12046-022-01928-w2022
12Ganeshkumar S., Kumar S.D., Magarajan U., Rajkumar S., Arulmurugan B., Sharma S., Li C., Ilyas R.A., Badran M.F., "Investigation of Tensile Properties of Different Infill Pattern Structures of 3D-Printed PLA Polymers: Analysis and Validation Using Finite Element Analysis in ANSYS",Materials,15, (15),2022,DOI:10.3390/ma151551422022
13Gebreslassie M.G., Kalamegam M.N., Gebrelibanos K.G., Mebrahtu A.H., Bahta S.T., Nurhussien F.F., Yohannes K.G., "Evidence-based energy conservation potentials and policy implications in the textile and garment industries of Ethiopia",Energy Efficiency,15, (6),2022,DOI:10.1007/s12053-022-10047-82022
14Emmanual L., Loganathan M., Karthikeyan T., "Machining studies on Monel K − 500 using TiAlN coated tungsten carbide inserts under Ag nanoparticles incorporated modified pongamia pinnata oil lubrication",Materials Research Express,9, (7),2022,DOI:10.1088/2053-1591/ac83952022
15Ramaswamy K., Jule L.T., Nagaprasad N., Subramanian K., Shanmugam R., Priyanka Dwarampudi L., Seenivasan V., "Investigation on Pollution Control Device (PCD) in iron foundry industry to reduce environmental chemicals",PLoS ONE,17, (45480),2022,DOI:10.1371/journal.pone.02710322022
16Murugesan S., Thangamuthu V., Shivaji R.M., Suresh Kumar R., "Experimental investigation and optimization for surface roughness for turning of AISI 1040 steel",Journal of Ceramic Processing Research,23, (3),2022,DOI:10.36410/jcpr.2022.23.3.3672022
17Raja K., Patan M.K., Ahmed M.A., Ganeshan P., "Water evaporation algorithm optimized cascade controller for frequency regulation of integrated microgrid",Journal of Intelligent and Fuzzy Systems,43, (5),2022,DOI:10.3233/JIFS-2124342022
18Thiyagu T.T., Gokilakrishnan G., Uvaraja V.C., Maridurai T., Prakash V.R.A., "Effect of SiO2/TiO2 and ZnO Nanoparticle on Cardanol Oil Compatibilized PLA/PBAT Biocomposite Packaging Film",Silicon,14, (7),2022,DOI:10.1007/s12633-021-01577-42022
19Kumar V.N., Singh G., Rudresha S., Kumar S.S., "Tool condition monitoring by quality during the micro milling process by using IoT and AI",6th International Conference on Electronics, Communication and Aerospace Technology, ICECA 2022 - Proceedings,2022,DOI:10.1109/ICECA55336.2022.100095452022
20Sathish K., Mohanraj A., Raman R., Sudha V., Kumar A., Vijayabhaskar V., "IoT based Mobile App for Skin Cancer Detection using Transfer Learning",6th International Conference on I-SMAC (IoT in Social, Mobile, Analytics and Cloud), I-SMAC 2022 - Proceedings,2022,DOI:10.1109/I-SMAC55078.2022.99873312022
21Varuthaiya M., Palanisamy C., Sivakumar V., Pushpanathan G., "Concrete with sisal fibered geopolymer: a behavioral study",Journal of Ceramic Processing Research,23, (6),2022,DOI:10.36410/jcpr.2022.23.6.9122022
22Singh B.K., Yaduvanshi A.A., Mishra A.K., "Comparative Study of CuO/ZTA and ZTA Composites in Terms of Functional Properties",Springer Proceedings in Materials,15,2022,DOI:10.1007/978-981-19-2572-6_282022
23Kishor Das R., Nayak B., Ganeshan P., Shivam Gautam S., Kumar Mandal K., "Dynamic mechanical behavior of a nano sized alumina fiber reinforced epoxy hybrid composites",Materials Today: Proceedings,76,2022,DOI:10.1016/j.matpr.2022.11.1582022
24Ganeshkumar S., Venkatesh S., Paranthaman P., Arulmurugan R., Arunprakash J., Manickam M., Venkatesh S., Rajendiran G., "Performance of Multilayered Nanocoated Cutting Tools in High-Speed Machining: A Review",International Journal of Photoenergy,2022,2022,DOI:10.1155/2022/59960612022
25Vinayagar K., Ganeshan P., Raja P.N., Zakir Hussain M.S., Kumar P.V., Ramshankar P., Mohanavel V., Mathankumar N., Raja K., Bezabih T.T., "Optimization of Crashworthiness Parameters of Thin-Walled Conoidal Structures",Advances in Materials Science and Engineering,2022,2022,DOI:10.1155/2022/44756052022
26Ramakrishnan T., Kumar S.S., Chelladurai S.J.S., Gnanasekaran S., Sivananthan S., Geetha N.K., Arthanari R., Assefa G.B., "Recent Developments in Stimuli Responsive Smart Materials and Applications: An Overview",Journal of Nanomaterials,2022,2022,DOI:10.1155/2022/40310592022
27Lokeshwari M., Sagar P.V., Kumar K.D., Thirupathy D., Subbiah R., Ganeshan P., Seikh A.H., Mohammed S.M.A.K., Christopher D., "Optimization and Tribological Properties of Hybridized Palm Kernel Shell Ash and Nano Boron Nitride Reinforced Aluminium Matrix Composites",Journal of Nanomaterials,2022,2022,DOI:10.1155/2022/84790122022
28Jagadeesan P., Sudharsan N., Subash S.M., Thirumoorthy P., Sugumaran B., Bari J.A., Vetturayasudharsanan R., Ambika D., Sharmiladevi K., Karuppanan K., "Study on Performance of Infilled Wall in an RC-Framed Structure Using a Reinforcing Band",Advances in Materials Science and Engineering,2022,2022,DOI:10.1155/2022/86439592022
29Vivek R., Venkatesh S., Manoj V., Kumar M., Mohanasundaram, "A brief review on improving materials particulates using cyclone separator by geometrical and turbulence factors",Materials Today: Proceedings,69,2022,DOI:10.1016/j.matpr.2022.08.1702022
30Gokilakrishnan G., Sathishkumar R., Sivakumar N.S., Kaliappan S., Sekar S., Patil P.P., Subbiah R., Yuvaraj K.P., Tadesse F.W., "Wear Behavior and FESEM Analysis of LM 25 Alloy MMHCs Reinforced with FE3O4and Gr by Utilizing Taguchi's Technique",Journal of Nanomaterials,2022,2022,DOI:10.1155/2022/32030572022
31Krishnaraja A.R., Kulanthaivel P., Ramshankar P., Wilson V.H., Palanisamy P., Vivek S., Sampathkumar V., Ganeshan P., Sashikkumar M.C., Raja K., Selvaraj S.K., John Rajan A., Jose S., "Performance of Polyvinyl Alcohol and Polypropylene Fibers under Simulated Cementitious Composites Pore Solution",Advances in Materials Science and Engineering,2022,2022,DOI:10.1155/2022/96698032022
32Afessa G., Saka A., Tesfaye J.L., Nagaprasad N., Shanmugam R., Dwarampudi L.P., Venkatesh S., Badassa B., Krishnaraj R., "Synthesis of Plant-Derived Khat Waste for Environmental Application",Journal of Nanomaterials,2022,2022,DOI:10.1155/2022/10947982022
33Kumar S.S., Kumar S.D., Magarajan U., Divya S., "Study of mechanical and wear behaviour of AA5083 graphene reinforced composites",Kovove Materialy,60, (2),2022,DOI:10.31577/km.2022.2.1212022
34Pratap A., Singh B.K., Sardana N., "Fracture in self-lubricating inserts: A case study",Materials Today: Proceedings,66,2022,DOI:10.1016/j.matpr.2022.06.0052022
35Gowtham S., Kumar T.C.A., Devi N.S.M.P.L., Chakravarthi M.K., Pradeep Kumar S., Karthik R., Anandaram H., Kumar N.M., Ramaswamy K., "A Survey on Additively Manufactured Nanocomposite Biomaterial for Orthopaedic Applications",Journal of Nanomaterials,2022,2022,DOI:10.1155/2022/89984512022
36Mohanraj N., Kumar N.M., Prathap P., Ganeshan P., Raja K., Mohanavel V., Karthick A., Muhibbullah M., "Mechanical Properties and Electrical Resistivity of the Friction Stir Spot-Welded Dissimilar Al-Cu Joints",International Journal of Polymer Science,2022,2022,DOI:10.1155/2022/41304402022
37Vigneshkumar M., Varthanan P.A., Murugan S.S., Gokilakrishnan G., "NUMERICAL ANALYSIS OF THE EFFECT OF HEAT INPUT IN THE SPOT WELDING OF DISSIMILAR MATERIALS [NUMERICNA ANALIZA VNOSA TOPLOTE PRI TOCKOVNEM VARJENJU DVEH RAZLICNIH MATERIALOV]",Materiali in Tehnologije,56, (3),2022,DOI:10.17222/mit.2022.4112022
38Bhanu Teja N., Ganeshan P., Mohanavel V., Karthick A., Raja K., Krishnasamy K., Muhibbullah M., "Performance and Emission Analysis of Watermelon Seed Oil Methyl Ester and n-Butanol Blends Fueled Diesel Engine",Mathematical Problems in Engineering,2022,2022,DOI:10.1155/2022/24563382022
39Duttaluru G., Singh P., Kumar Ansu A., kumar Sharma R., kumar A., Mishra S., "Methods to enhance the thermal properties of organic phase change materials: A review",Materials Today: Proceedings,63,2022,DOI:10.1016/j.matpr.2022.04.9112022
40Vivek R., Prakash B., Sivamani S., Selvaganapathy V., Kumar S.P., Ramesh B., Karthik R., Jayakumar V., Masi C., "Morphological Failure Study of Low Nickel Austenitic Grade SS: Metal Spinning",Journal of Nanomaterials,2022,2022,DOI:10.1155/2022/20262102022
41Sathish K., Kumar S.S., Magal R.T., Selvaraj V., Narasimharaj V., Karthikeyan R., Sabarinathan G., Tiwari M., Kassa A.E., "A Comparative Study on Subtractive Manufacturing and Additive Manufacturing",Advances in Materials Science and Engineering,2022,2022,DOI:10.1155/2022/68926412022
42Aravinth K., Ramakrishnan T., Tamilarasan V.D., Veeramanikandan K., "A brief review on plant fibres composites: Extraction, chemical treatment and fibre orientation",Materials Today: Proceedings,62,2022,DOI:10.1016/j.matpr.2022.02.2912022
43Suresh Kumar R., Senthil Kumar S., Rajendran C., Samuel Chelladurai S.J., Balcha G., "Investigation on Corrosion Behaviour of LM25-SiCp Composite Using Taguchi Method",Advances in Materials Science and Engineering,2022,2022,DOI:10.1155/2022/43410182022
44Ramakrishnan T., Mohan Gift M.D., Chitradevi S., Jegan R., Subha Hency Jose P., Nagaraja H.N., Sharma R., Selvakumar P., Hailegiorgis S.M., "Study of Numerous Resins Used in Polymer Matrix Composite Materials",Advances in Materials Science and Engineering,2022,2022,DOI:10.1155/2022/10889262022
45Ramakrishnan T., Senthil Kumar S., Samuel Chelladurai S.J., Gnanasekaran S., Geetha N.K., Arthanari R., Debtera B., "Effect of Moisture Content on Mechanical Properties of AAM Natural Fiber-Reinforced Isophthalic Polyester Composites",Advances in Materials Science and Engineering,2022,2022,DOI:10.1155/2022/35331432022
46Ramakrishnan T., Raja Karthikeyan K., Tamilselvan V., Sivakumar S., Gangodkar D., Radha H.R., Narain Singh A., Asrat Waji Y., "Study of Various Epoxy-Based Surface Coating Techniques for Anticorrosion Properties",Advances in Materials Science and Engineering,2022,2022,DOI:10.1155/2022/52859192022
47Saravanan D., Gokilakrishnan G., Raajeshkrishna C.R., "Effect of carbon/kevlar reinforcement and hybrid order on mechanical properties of glass/epoxy composites",Advances in Materials and Processing Technologies,8, (3),2022,DOI:10.1080/2374068X.2021.19657192022
48Dharani Kumar S., Sundaram S.K., "Experimental ballistic performance determination of friction stir welded magnesium (AZ31B) targets",Mechanics Based Design of Structures and Machines,50, (6),2022,DOI:10.1080/15397734.2020.17664912022
S.NoDeptName of Principal Investigator and Co- InvestigatorTitle of the ProposalType of Project (Research/ Seminar/ Workshop / FDP/ Conference)Name of Funding AgencyPeriodTotal Grant Received
1MECH
EEE
Dr.G. Karuppusami
Dr.P.Anbarasu
Solar Powered Nano Milk making machine for small scale farmers
in adopted village
UBADSTOne year₹100,000
2MECH
ECE
Dr.R.Suresh Kumar
Lt.M.Mahaboob
Enhancing Precision Agriculture by fusing AI with Aerial Electric Vehicle TechnologyFDPAICTE - ATAL12 days₹600,000
Total₹700,000
S.NoDeptName of Principal Investigator and Co- InvestigatorTitle of the ProposalType of Project (Research/ Seminar/ Workshop / FDP/ Conference)Name of Funding AgencyPeriodTotal Grant Received
1MechDr.S. VenkateshInvestigation and development low cost emission control system for casting industriesResearchDST SERBThree year1,500,000
2MechDr. T. RamakrishnanInternational Conference on Sustainable Materials and Technologies 2024ConferenceSERBOne year80,000
3MechDr.G. Karuppusami
Mr.N. Vishnu Sakravarthy
Women Entrepreneurship Development Program WEDP and Faculty Development Program FDPFDP/ WorkshopDSTOne year650,000
Total2,230,000
S.NoDeptName of Principal Investigator and Co- InvestigatorTitle of the ProposalType of Project (Research/ Seminar/ Workshop / FDP/ Conference)Name of Funding AgencyPeriodTotal Grant Received
1MechDr.G.Karuppusami, Mr.N.Vishnu SakravarthySmart India Hackathon 2022 Software EditionHackathonAICTE, MOEAug 25 & 26672,000
2MechDr.R.Suresh Kumar
Dr.T.Ramakrishnan
Dr.S.Venkatesh
Dr.G.Gokilakrishnan
Dr.Bipin Kumar Singh
DST-FIST FundingResearchDST19-12-2022 to 19-12-20275,900,000
3MechDr.G.Karuppusami
Mr.N.Vishnu Sakravarthy
Women Entrepreneurship Development Program WEDP and Faculty Development Program FDPSkill DevelopmentDST-NIMATMar-2023 to 01-05-2023260,000
4MechDr.N.K.MillerjothiInternational Conference on Emerging Trends in Mechanical Sciences for Sustainable Technologies ICETMSST 2023ConferenceCSIR12-04-2023 & 13-04-202330,000
Total6,862,000
S.NoDeptName of Principal Investigator and Co- InvestigatorTitle of the ProposalType of Project (Research/ Seminar/ Workshop / FDP/ Conference)Name of Funding AgencyPeriodTotal Grant Received
1MechDr.R.Suresh Kumar
Mr.K.Sathish
Mr. V.Naveenprabhu
FDP-Trends & Challenges in Electric VehiclesFDPAICTE-ATAL20.09.2021 to 24.09.202193,000
Total93,000
S.NoDeptName of Principal Investigator and Co- InvestigatorTitle of the ProposalType of Project (Research/ Seminar/ Workshop / FDP/ Conference)Name of Funding AgencyPeriodTotal Grant Received
1MechDr.G.KaruppusamiThe National Science & Technology
Entrepreneurship Development Board (NSTEDB) approved establishment of Innovation and Entrepreneurship Development Centre (IEDC)
ProjectsDST – NSTEDB2020-21800,000
2MechDr.G.KaruppusamiNSTEDB sanctioned Free Women Entrepreneurship Develoment program for external candidatesSkill DevelopmentNSTEDB2020-21160,000
3MechDr.G.KaruppusamiUBA  Program Perennial Award FundProjectsMHRD2020-21175,000
Total1,135,000
S.NoDeptName of Principal Investigator and Co- InvestigatorTitle of the ProposalType of Project (Research/ Seminar/ Workshop / FDP/ Conference)Name of Funding AgencyPeriodTotal Grant Received
1MechDr.G.KaruppusamiSuryamitra Solar Training Programme sponsored by National Institute of Solar Energy (NISE), Ministry of New and Renewable Energy (MNRE), Government of IndiaSkill DevelopmentNISE, MNRE2019-2020998,174
2MechDr.G.KaruppusamiThe National Science & Technology Entrepreneurship Development Board (NSTEDB) approved establishment of Innovation and Entrepreneurship Development Centre (IEDC)ProjectsDST – NSTEDB2019-2020800,000
3MechDr.G.Karuppusami
Mr.P.Anbarasu
Floating solar powered drip irrigation system for the sapling using optimization techniques.ProjectsMHRD2019-2020100,000
4MechDr.G.KaruppusamiEntrepreneurship Development Institute of India (EDII), Ahmadabad sanctioned Free Women Entrepreneurship Develoment program for external candidatesSkill DevelopmentEntrepreneurship Development Institute of India (EDII)2019-2020200,000
Total2,098,174
S.NoDeptName of Principal Investigator and Co- InvestigatorTitle of the ProposalType of Project (Research/ Seminar/ Workshop / FDP/ Conference)Name of Funding AgencyPeriodTotal Grant Received
1MechDr.G. KaruppusamiThe National Science & Technology Entrepreneurship Development Board (NSTEDB) approved establishment of Innovation and Entrepreneurship Development Centre (IEDC)ProjectsDST – NSTEDB2018-2019800,000
2MechDr.G. KaruppusamiSuryamitra Solar Training Programme sponsored by National Institute of Solar Energy (NISE), Ministry of New and Renewable Energy (MNRE),Government of IndiaSkill DevelopmentNISE, MNRE2018-2019854,251
3MechDr.G. KaruppusamiEntrepreneurship Development Institute of India (EDII), Ahmadabad sanctioned Free Women Entrepreneurship Develoment program for external candidatesSkill DevelopmentEntrepreneurship Development Institute of India (EDII)2018-2019200,000
4MechDr.G. KaruppusamiUnnat Bharat Abjiyan Program sanctioned by MHRD and AICTE. 5 Villages adopted and Customisation ProjectProjectsMHRD2018-201950,000
5MechDr.G. Karuppusami,
Mr.P.Anbarasu
Customization of 13 solar street lights at Kodhavadi VillageProjectsMHRD2018-201950,000
Total1,954,251
S.NoDeptName of Principal Investigator and Co- InvestigatorTitle of the ProposalType of Project (Research/ Seminar/ Workshop / FDP/ Conference)Name of Funding AgencyPeriodTotal Grant Received
1MechDr.G.KaruppusamiSuryamitra Solar Training Programme sponsored by National Institute of Solar Energy (NISE), Ministry of New and Renewable Energy (MNRE), Government of IndiaSkill DevelopmentNISE, MNRE2017-18786,334
2MechDr.G.KaruppusamiThe National Science & Technology Entrepreneurship Development Board (NSTEDB) approved establishment of Innovation and Entrepreneurship Development Centre (IEDC)ProjectsDST – NSTEDB2017-18800,000
3MechDr.G.KaruppusamiEntrepreneurship Development Institute of India (EDII), Ahmadabad sanctioned Free Women Entrepreneurship Develoment program for external candidatesSkill DevelopmentEntrepreneurship Development Institute of India (EDII)2017-18200,000
Total1,786,334
S.NoDeptName of Principal Investigator and Co- InvestigatorTitle of the ProposalType of Project (Research/ Seminar/ Workshop / FDP/ Conference)Name of Funding AgencyPeriodTotal Grant Receive
1MechDr.G. KaruppusamiAll India Council for Technical Education (AICTE) has sanctioned to conduct Pradhan Mantri Kaushal Vikas Yojana (PMKVY) skill development programme. 4 Programmes are approved; CNC Machining, Lathe Operation, Electrician and Plumbing.Skill DevelopmentAICTE2016-171,183,640
2MechDr.G. KaruppusamiThe National Science & Technology Entrepreneurship Development Board (NSTEDB) approved establishment of Innovation and Entrepreneurship Development Centre (IEDC)ProjectsDST – NSTEDB2016-171,330,000
Total2,513,640
S.NOACY DepartmentPatent Application NumberStatus of Patent (Published / Granted/Filed)Inventor/s NameTitle of the PatentApplicant/s NamePatent Filed Date (DD/MM/YYYY) Patent Published Date / Granted Date (DD/MM/YYYY)Patent Publication Number / Granted Number
12023-2024MECH202341083399PublishedDr.R.Suresh Kumar
Dr.M.Nirmala
Mr.N.Hariharan
Ms.Anci Manon Mary
Dr.L.Vigneash
Mr.G.Muthuram
Mr.P.A.Prassath
Mr.Palpandian P
Mr.Govindaraj
DESIGN OF SMART SECURITY AND LIGHTING SYSTEM FOR BUILDING AUTOMATIONDr.R.Suresh Kumar
Dr.M.Nirmala
Mr.N.Hariharan
Ms.Anci Manon Mary
Dr.L.Vigneash
Mr.G.Muthuram
Mr.P.A.Prassath
Mr.Palpandian P
Mr.Govindaraj
7/12/20235/1/20241/2024
22023-2024MECH202341086383PublishedGaneshan Pushpanathan
Laxmi Priya Karthikeyan
Maniraja Kumar
Raj Karuppusamy
ENHANCE THE SAFETY OF PASSENGERS IN PUBLIC TRANSPORTS BY USING IOT & MACHINE LEARNING TECHNIQUESSri Eshwar College of Engineering18/12/202312/1/202402/2024
32023-2024MECH202341086384PublishedR. Vivek
S. Venkatesh
K. Sathish
SA Vigneshvar
REAL TIME KINETIC – DRONE MAPPING METHODSri Eshwar College of Engineering18/12/202312/1/202402/2024
42023-2024MECH202341087472PublishedDr. Bipin Kumar Singh
Dr. P. Ganeshan
Dr. Amit Kumar
ROBOTIC SYSTEM FOR AUTOMATIC GARBAGE COLLECTORSri Eshwar College of Engineering21/12/202312/1/202402/2024
52023-2024MECH202341087475PublishedDr. Bipin Kumar Singh
Dr. P. Ganeshan
Dr. Amit Kumar
DESIGN AND DEVELOPMENT OF A NOVEL AUTOMATIC DOOR BELLSri Eshwar College of Engineering21/12/202312/1/202402/2024
62023-2024MECH202341088670PublishedDr. Amit Kumar
Dr. Bipin Kumar Singh
Dr. P. Ganeshan
DESIGN AND DEVELOPMENT OF A SOLAR-POWERED BLOWER USING SCRAPSri Eshwar College of Engineering26/12/202319/01/202403/2027
72023-2024MECH202341088677PublishedDr.SURESHBABU.Y
ABINAV M M
JEEVANANTHAM T
SUDEEP V
BARATH KUMAR S
DESIGN AND DEVELOPMENT OF E-BIKESri Eshwar College of Engineering26/12/202319/01/202403/2028
82023-2024MECH202341089701PublishedDr.T.Ramakrishnan
Dr.R.Suresh Kumar
Dr.S.Venkatesh
AUTOMATIC SIDE STAND RETRIEVAL SYSTEMSri Eshwar College of Engineering29/12/202319/01/202403/2024
92023-2024MECH202341089703PublishedDr.S.Venkatesh
Dr.R.Suresh Kumar
Dr.T.Ramakrishnan
SUCTION SYSTEM FOR CAPTURING DUST FROM THE WOOD CUTTING MACHINESri Eshwar College of Engineering29/12/202319/01/202403/2024
102023-2024MECH202441002587PUBLISHED 1)Dr.R.Suresh Kumar
2)Dr.S.Sivakumar
3)Dr.M.Nirmala
4)Mr.P.A.Prassath
5)Dr.S.Sam Karthik
6)Ms.Sudha V
7)Mr.Lalit Bhanwrela
8)Mr.S.Rajesh
9)Mr.K.Sedhuramalingam
DESIGN AND CONTROL OF PV BASED ISOLATED POWER SUPPLY USING IQF CONTROLLER
FOR AGRICULTURAL
1)Dr.R.Suresh Kumar
2)Dr.S.Sivakumar
3)Dr.M.Nirmala
4)Mr.P.A.Prassath
5)Dr.S.Sam Karthik
6)Ms.Sudha V
7)Mr.Lalit Bhanwrela
8)Mr.S.Rajesh
9)Mr.K.Sedhuramalingam
12/01/202409/02/20246/2024
112023-2024MECH202341088475PUBLISHEDSathish K
Aditya Krishna S
Kamalapuram Mahaboob Basha
Pravin R
DESIGN AND DEVELOPMENT OF HAND GESTURE CONTROLLED WHEEL CHAIRSri Eshwar College of Engineering23/12/2023 23/02/202408/2024
122023-2024MECH202441019810PUBLISHED 1)Dr.R.Suresh Kumar
2)Dr.M.Nirmala
3)Dr.K.Thilagavathi
4)Mr.N.Hariharan
5)Ms.Manju.K
6)Mr.Maniprabhu K
7)Mr.Muniyappan R
8)Mr Harinesh J
9)Mr Nandeshwaran N
DESIGN AND IMPLEMENTATION OF VIRTUAL CONTROL IN INDUSTRIAL AUTOMATION 1)Dr.R.Suresh Kumar
2)Dr.M.Nirmala
3)Dr.K.Thilagavathi
4)Mr.N.Hariharan
5)Ms.Manju.K
6)Mr.Maniprabhu K
7)Mr.Muniyappan R
8)Mr Harinesh J
9)Mr Nandeshwaran N
18/03/2024 29/03/202413/2024
Design Grant
12023-2024Mech364665-001Granted1.Dr. SWARNAMBUJ SUMAN
2.Dr.P.GANESHAN
3. Dr. AMIT KUMAR SHARMA
4. Dr. UMAVATHI M
SUN TRACKING SOLAR PANEL1.Dr. SWARNAMBUJ SUMAN
2.Dr.P.GANESHAN
3. Dr. AMIT KUMAR SHARMA
4. Dr. UMAVATHI M
24/05/202226/01/202404/2024
S.NOACY DepartmentPatent Application NumberStatus of Patent (Published / Granted/Filed)Inventor/s NameTitle of the PatentApplicant/s NamePatent Filed Date (DD/MM/YYYY) Patent Published Date / Granted Date (DD/MM/YYYY)Patent Publication Number / Granted Number
12023-2024MECH202341013025Published1)Dr. Bipin Kumar Singh
2)Dr. R Suresh Kumar
3)Dr. P. Ganeshan
4)Dr. Amit Kumar
5)Mr. K. Satish
A Flexible Battery Operated Palm Wheeler
Sri Eshwar College of Engineering
27/02/202317/03/202311/2023
22023-2024MECH202341033145Published1)Abhimannyu Sharma
2)Dheeraj Kumar
3)Amit Kumar
4)Bipin Kumar Singh
5)R Suresh Kumar
6)P. Ganeshan
Design and development of a novel solar concentrating spittoon against COVID-19Sri Eshwar College of Engineering05/11/202318/08/202333/2023
32023-2024MECH202341045089Published1)MOHANAVEL VINAYAGAM
2)P. GANESHAN
3)S. SURESH KUMAR
4)K. RAJA
5)A. THANIKASALAM
6)S. JACOB
Impact of nano Zinc oxide particles on the mechanical behavior of natural fiber reinforced polymer
composites
1)MOHANAVEL VINAYAGAM
2)P. GANESHAN
3)S. SURESH KUMAR
4)K. RAJA
5)A. THANIKASALAM
6)S. JACOB
07/05/20231/9/202335/2023
42023-2024MECH202341069271Published 1)Dr. R. Senthil Kumar
2)Ms. V. Pavithra
3)Mrs. Vidhyalakashmi R
4)Mr. P.A.Prassath
5)Dr. G. Gokilakrishnan
6)Mr. A.Kuppuswamy
7)Dr. Arun.S
8)Mr. Palpandian P
9)Mr. Govindaraj
10)Dr.S.Sam Karthik
11)Mrs.N.Abinaya
12)Mr. M.Shaileas Babu
13)Mrs. Thariga Shrinithi R
14)Mrs. Rasitha B
15)Mrs. Tejashwini.M
VISUALIZED CONTROL OF BRUSHLESS AUTO-CAR WASH SYSTEM USING INTELLIGENT CONTROLLER 1)Dr. R. Senthil Kumar
2)Ms. V. Pavithra
3)Mrs. Vidhyalakashmi R
4)Mr. P.A.Prassath
5)Dr. G. Gokilakrishnan
6)Mr. A.Kuppuswamy
7)Dr. Arun.S
8)Mr. Palpandian P
9)Mr. Govindaraj
10)Dr.S.Sam Karthik
11)Mrs.N.Abinaya
12)Mr. M.Shaileas Babu
13)Mrs. Thariga Shrinithi R
14)Mrs. Rasitha B
15)Mrs. Tejashwini.M
14/10/202324/11/202347/2023
52023-2024MECH202341069318Published 1)V.Bharath Choudry
2)Dr.R.Shanmugasundaram
3)Dr.V.Parimala
4)Mr.Vinothkumar.A
5)Mr.P.Sridhar
6)Mrs.D.Chitra
7)Mr.Gokul Selvaraj
8)Mr.Joshua Daniel S
9)Dr.G.Gokilakrishnan
SERVO CONTROLLER BASED 4 AXIS POSITIONING SYSTEM 1)V.Bharath Choudry
2)Dr.R.Shanmugasundaram
3)Dr.V.Parimala
4)Mr.Vinothkumar.A
5)Mr.P.Sridhar
6)Mrs.D.Chitra
7)Mr.Gokul Selvaraj
8)Mr.Joshua Daniel S
9)Dr.G.Gokilakrishnan
14/10/202324/11/202347/2023
62023-2024MECH202341070468Published 1)P.Ganeshan
2)Bimalendu Dash
3)Mukesh Panneerselvam
4)S Vivek
5)V Priya
6)V Sampath Kumar
EVALUATION OF STRENGTH AND MIX PROPORTIONS OF GRANITE DUST BRICKS1)P.Ganeshan
2)Bimalendu Dash
3)Mukesh Panneerselvam
4)S Vivek
5)V Priya
6)V Sampath Kumar
17/10/202324/11/202347/2023
Design - Grant
12023-2024MECH364969-001Granted1.Dr. B. MURALI
2 Dr. D. CHANDRAMOHAN
3. Dr. S. DINESH KUMAR
4. Dr. R. SURESH KUMAR
ELECTRONIC HELMET LOCK FOR
TWO-WHEELERS
27/05/202220/01/202303/2023
22023-2024MECH392522-001Granted1.Mr. S. VINODH
2. Dr. S. SEENIVASAN
3. Mr. P SATISHKUMAR
4. Dr. BIBIN JOSE
MULTI TWISTED BLADES IN SOLAR WATER HEATER1.Mr. S. VINODH
2. Dr. S. SEENIVASAN
3. Mr. P SATISHKUMAR
4. Dr. BIBIN JOSE
09/12/20233/11/202344/2023
Utility Patent Grant
12023-2024MECH202241062980Granted1)Dr.K.Millerjothi
2)Dr.K. Parthiban
3)Dr. A.Elayaperumal
4)Dr.R.Suresh Kumar
5)Dr.P.Ganeshan
CONVERSION OF LOW-DENSITY POLYETHYLENE PLASTICS (LDPE) POLYMERS INTO FUEL
OIL THROUGH PYROLYSIS PROCESS
Sri Eshwar College of Engineering04/11/202209/05/2023
S.NOACY DepartmentPatent Application NumberStatus of Patent (Published / Granted/Filed)Inventor/s NameTitle of the PatentApplicant/s NamePatent Filed Date (DD/MM/YYYY) Patent Published Date / Granted Date (DD/MM/YYYY)Patent Publication Number / Granted Number
1MECHMECH202241006238Published1)DEEPAK GOWDA .L
2)DR. RAJ KUMAR
3)DR.T.RAMAKRISHNAN
4)DR. S. SARAVANAN
5)DR. GAVHANE VRUSHALI SOMANATH
6)DR. S. VELAYUTHAM
7)ARULKUMAR P
8)DR. VIVEKANAND B. JADHAV
9)PREM CHANDRA
10)SAMAYARAJ MURALI KISHANLAL
11)M.S RAVI THEJA
12)DR. MAKARAND UPADHYAYA
SMART SOLAR CELL EMBEDDED CLOTH CLEANSING MACHINE1)DEEPAK GOWDA .L
2)DR. RAJ KUMAR
3)DR.T.RAMAKRISHNAN
4)DR. S. SARAVANAN
5)DR. GAVHANE VRUSHALI SOMANATH
6)DR. S. VELAYUTHAM
7)ARULKUMAR P
8)DR. VIVEKANAND B. JADHAV
9)PREM CHANDRA
10)SAMAYARAJ MURALI KISHANLAL
11)M.S RAVI THEJA
12)DR. MAKARAND UPADHYAYA
2/5/20222/18/202207/2022
2MECHMECH202241007263Published1)DR. L.SELVAM
2)G. GOKILAKRISHNAN
3)DR. RAHUL RATNAKAR MAHAMUNI
4)DR YUVARAJ DURAISAMY
5)MRS R TAMILARASI
6)DR K AYYAR
7)ASHIRBAD SAHOO
8)SANJAY SINGH THAKUR
9)DHARMBIR SINGH
10)ENGR. SAJITH KUMAR R
11)DR SONU MISHRA
12)DR VIRENDRA GOMASE
SMART AND SAFE GAS FLOW PIPELINE BASED ON IOT FOR COOKING APPLIANCES1)DR. L.SELVAM
2)G. GOKILAKRISHNAN
3)DR. RAHUL RATNAKAR MAHAMUNI
4)DR YUVARAJ DURAISAMY
5)MRS R TAMILARASI
6)DR K AYYAR
7)ASHIRBAD SAHOO
8)SANJAY SINGH THAKUR
9)DHARMBIR SINGH
10)ENGR. SAJITH KUMAR R
11)DR SONU MISHRA
12)DR VIRENDRA GOMASE
2/11/20222/25/202208/2022
3MECHMECH202241020401Published1)Dr. A.NARASIMA VENKATESH
2)Dr. R. SURESH KUMAR
3)Mr. B.VIJAYA PRAKASH
4)Dr. A. ARUN NEGEMIYA
5)Dr. RADHIKA BASKAR
6)Mr. S.DINESHKUMAR
AI BASED FIRE FIGHTING ROBOTAI BASED FIRE FIGHTING ROBOT1)Dr. A.NARASIMA VENKATESH
2)Dr. R. SURESH KUMAR
3)Mr. B.VIJAYA PRAKASH
4)Dr. A. ARUN NEGEMIYA
5)Dr. RADHIKA BASKAR
6)Mr. S.DINESHKUMAR
4/5/20224/15/202215/2022
4MECHMECH202241034754Published1)Dr. N. Mathan kumar
2)Dr. S. Nagaraja
3)Mr.S.Sabarinath
4)Mr.S.Ragunanthan
5)Mr. D. Sanjeevi rao
6)Mr.K.Yogananth
7)Dr.P. Ganeshan
DESIGN AND FABRICATION OF AUTOMATIC PNEUMATIC EMERGENCY EXIT FOR
AUTOMOBILE
1)Dr. N. Mathan kumar
2)Dr. S. Nagaraja
3)Mr.S.Sabarinath
4)Mr.S.Ragunanthan
5)Mr. D. Sanjeevi rao
6)Mr.K.Yogananth
7)Dr.P. Ganeshan
6/17/20226/24/202225/2022
5MECHMECH202241057649Published1)Dr.S.Venkatesh
2)Dr.R.Suresh Kumar
3)Dr.T.Ramakrishnan
4)Dr.G.Gokilakrishnan
5)Dr.Y.Sureshbabu
6)Dr.V.Naveenprabhu
7)Dr.P.Ganeshan
8)Dr.S.Ganeshkumar
9)Mr.A.Vimal
10)Mr.R.Vivek
Convergent Divergent Type Inlet Particle SeparatorSri Eshwar College of Engineering10/8/202210/14/202241/2022
6MECHMECH202241058301Published1)Dr.P.Ganeshan
2)Dr.R.Suresh Kumar
3)Dr.Bipin Kumar Singh
4)Dr.Amit Kumar
5)Dr.T.Ramakrishnan
6)Dr.V.Naveenprabhu
7)Mr.K.Sathish
8)Mr.S.Gokul
9)Mr.N.Vishnu Sakravarthy
10)Dr.K.Millerjothi
11)Dr.Y.Sureshbabu
Automatic Water Filling System Using ArduinoSri Eshwar College of Engineering10/12/202210/21/202242/2022
7MECHMECH202241058709Published1)Dr.T. Ramakrishnan
2)Dr.R.Suresh Kumar
3)Dr.K.Millerjothi
4)Dr.G.Gokilakrishanan
5)Dr.S.Venkatesh
6)Dr.Y.Sureshbabu
7)Dr.V.Naveenprabhu
8)Dr.S.Ganeshkumar
9)Mr.S.Gokul
10)Mr.R.Vivek
DESIGN AND FABRICATION OF BIOMASS BREQUETTING MACHINESri Eshwar College of Engineering10/14/202211/11/202245/2022
8MECHMECH202241059429Published1)Dr.K.Millerjothi
2)Dr.R.Suresh Kumar
3)Dr.P.Ganeshan
4)Dr.G.Gokilakrishanan
5)Dr.T.Ramakrishnan
6)Dr.S.Venkatesh
7)Dr.S.Ganeshkumar
8)Dr.Y.Sureshbabu
9)Dr.V.Naveenprabhu
10)Dr.Bipin Kumar Singh
11)Dr.Amit Kumar
Experimental Investigation on the effect of different reflecting surface by using Box type Solar cookerSri Eshwar College of Engineering10/18/202210/28/202243/2022
9MECHMECH202241059740Published1)Mr.K.Sathish
2)Dr.S.Ganeshkumar
3)Dr.T.Ramakrishnan
4)Dr.G.Gokilakrishanan
5)Dr.P.Ganeshan
6)Dr.K.Millerjothi
7)Dr.R.Suresh Kumar
8)Dr.Y.Sureshbabu
9)Dr.S.Venkatesh
10)Dr.V.Naveenprabhu
11)Dr.Bipin Kumar Singh
Smart Soil Testing MachineSri Eshwar College of Engineering10/19/202210/28/202243/2022
10MECHMECH202241059741Published1)Dr.V.Naveenprabhu
2)Mr.N.VishnuSakravarthy
3)Mr.S.Gowtham
4)Mr.R.Vivek
5)Mr.S.Gokul
6)Dr.Amit Kumar
7)Mr.K.Sathish
8)Mr.A.Vimal
9)Dr.S.Venkatesh
10)Dr.Y.Sureshbabu
11)Dr.Bipin Kumar Singh
IOT BASED COAL MINE SAFETY SYSTEM USING NODE MCUSri Eshwar College of Engineering10/19/202210/28/202243/2022
11MECHMECH202241061075Published1)Dr.Y.Sureshbabu
2)Dr.P.Ganeshan
3)Dr.R.Suresh Kumar
4)Mr.R.Vivek
5)Mr.S.Gokul
6)Dr.Amit Kumar
7)Mr.K.Sathish
8)Mr.A.Vimal
9)Dr.S.Venkatesh
10)Dr.V.Naveenprabhu
11)Dr.Bipin Kumar Singh
Copper Chromium Zirconium Coated Piston Run By Biodiesel Operated IC Engine Test RigSri Eshwar College of Engineering10/27/202211/4/202244/2022
12MECHMECH202241061076Published1)Vivek R
2)Dr. Amit Kumar
3)Mr. K. Sathish
4)Mr. A. Vimal
5)Mr. S. Gokul
6)Mr. S. Gowtham
7)Mr. N. Vishnu sakkaravarthy
8)Dr. Bipin Kumar Singh
9)Dr. V. Naveen prabhu
10)Dr. S. Venkatesh
11)Dr. Y. Sureshbabu
IoT based Water Quality Management systemsSri Eshwar College of Engineering10/27/202211/18/202246/2022
13MECHMECH202241062980Published1)Dr.K.Millerjothi
2)Dr.K. Parthiban
3)Dr. A.Elayaperumal
4)Dr.R.Suresh Kumar
5)Dr.P.Ganeshan
CONVERSION OF LOW-DENSITY POLYETHYLENE PLASTICS (LDPE) POLYMERS INTO FUEL OIL THROUGH PYROLYSIS PROCESSSri Eshwar College of Engineering11/4/202211/18/202246/2022
14MECHMECH202241064206Published1)Mr.A.VIMAL
2)Dr.S.VENKATESH
3)Mr.K.SATHISH
4)Mr.S.GOKUL
5)Mr.S.GOWTHAM
6)Mr.N.VISHNU SAKRAVARTHY
7)Dr.BIPIN KUMAR SINGH
8)Dr.V.NAVEENPRABHU
9)Dr.Y.SURESHBABU
10)Mr.R.VIVEK
11)Dr.K.MILLERJOTHI
Test Equipment for Hydrocyclone Performance ExperimentationSri Eshwar College of Engineering11/10/202211/18/202246/2022
15MECHMECH202241064427Published1)Dr.S.Ganeshkumar
2)Dr.R.Suresh Kumar
3)Dr.T. Ramakrishnan
4)Dr.P.Ganeshan
5)Dr.K.Millerjothi
6)Dr.G.Gokilakrishanan
7)Dr.S.Venkatesh
8)Dr.Y.Sureshbabu
9)Dr.V.Naveenprabhu
10)Dr.V.Mohanavel
11)Dr.K.Raja
12)Mr.R,Vivek
Tool Wear Monitoring and Prediction Through Data Logging and Machine Learning Model in Turning OperationSri Eshwar College of Engineering11/10/202211/25/202247/2022
16MECHMECH202241069533Published1)Dr M.Vigneshkumar
2)Dr P Ashoka Varthanan
3)Dr.G Gokilakrishnan
4)Dr S Senthil Murugan,
5)Mr N Gobikrishnan
6)Mr S Bhuvan lakshman
7)Mr A Dhayanithi
8)Mr E Barath Raj
9)Mr A Ebbi Arul Sherwin
10)Mr R S Bavithran
11)Mr Kabilan K
12)Mr S Aswinkumar
13)Mr Akash V M
14)Mr. Vignesh T
DEVELOPMENT OF DUCT FOR HOVERBOARD SYSTEM FOR BETTER EFFICIENCY1)Dr M.Vigneshkumar
2)Dr P Ashoka Varthanan
3)Dr.G Gokilakrishnan
4)Dr S Senthil Murugan,
5)Mr N Gobikrishnan
6)Mr S Bhuvan lakshman
7)Mr A Dhayanithi
8)Mr E Barath Raj
9)Mr A Ebbi Arul Sherwin
10)Mr R S Bavithran
11)Mr Kabilan K
12)Mr S Aswinkumar
13)Mr Akash V M
14)Mr. Vignesh T
12/2/202212/9/202249/2022
S.NoTitle of the ProjectNames of the Principal InvigilatorsDate of Issuing Sanction OrderDepartmentDurationAmount of Seed Money Sanctioned (Rs.)
1IoT Platform for Industry 5.0 IntegrationDr. S. Ganeshkumar26- Jun-2024Mech2024-2025335,627
Total335,627
S.NoTitle of the ProjectNames of the Principal InvigilatorsDate of Issuing Sanction OrderDepartmentDurationAmount of Seed Money Sanctioned (Rs.)
1Procurement of Energy Audit
Instruments
Dr.N.K.Millejothi, Prof04-10-2023Mech2023-2024399,481
2Experimental Investigation on Emissions and Performance Characteristics of a ethanolDr. Y. Sureshbabu04-10-2023Mech2023-2024200000
3Improving Hydrothermal
performance of Heat Exchanger Using Enhancer and Nano-fluids
Dr.Amit Kumar, AP
Dr.Bipin Kumar Singh, AP
Dr.P.Ganeshan, Prof
04-10-2023Mech2023-2024215,000
4Design and Development of Novel plant derivedDr. T. Ramakrishnan,ASP
Dr. R. Sureshkumar,Prof
Dr.S. Venkatesh, ASP
04-10-2023Mech2023-2024358,000
Total1,172,481
S.NoTitle of the ProjectNames of the Principal InvigilatorsDate of Issuing Sanction OrderDepartmentDurationAmount of Seed Money Sanctioned (Rs.)
1E-Vehicle
Mr.S.Gowtham, AP
Mr.K.Sathish, AP
08 Oct 2022Mech2022-2023400,000
Total400,000

COME JOIN US TO
EXPERIENCE LEARNING
AT ITS BEST!